Panasonic LUMIX DMC-ZS100 Owner's Manual page 105

About [T] (Time)
ZS100
If you set the shutter speed to [T], the shutter stays open when the shutter button is
pressed fully. (Approximately up to 120 seconds)
The shutter closes if you press the shutter button again. Use this function when you
want to keep the shutter open for an extended period, for example, to record pictures of
fireworks or night scenes.
• When you take pictures with the shutter speed set to [T], use a sufficiently charged
battery. (→25)
• Manual exposure assist is not displayed.
• When ISO sensitivity is set to [AUTO], ISO sensitivity will change to [125].
• You cannot use this function when the electronic shutter is used.
●
When you take pictures with the shutter speed set to T (time), we recommend
using remote recording
release, in order to prevent jitter.
●
When you take still pictures with the shutter speed set to T (time), the pictures
may have higher noise levels. If you want to suppress noise, we recommend
taking pictures by setting [Long Shtr NR] to [ON] in the [Rec] menu.
ZS100
value and shutter speed effects on the recording screen
→ [Custom] → [Constant Preview] → [ON] / [OFF]
●
This function is disabled when the flash is used. Close the flash.
●
You can use this function only in Manual Exposure Mode.
105
Taking pictures by setting the aperture value and shutter speed
(→312)
Enabling/disabling the preview of the selected aperture
with a tripod or smartphone as a remote shutter
Recording mode
(→144)
SQW0547