Panasonic LUMIX DMC-ZS100 Owner's Manual page 309

■
Using an iOS device
• When reading a QR Code to connect
(Steps to
Start "Image App"
Select [ ] → [OK]
Read the QR Code displayed on this unit with "Image App"
(When you press [MENU/SET] on the camera, the QR code is displayed in an
enlarged size.)
• When the smartphone is connected to a wireless access point, it may take time to display QR
code.
Install the profile
• The message is displayed in the Web browser.
• If a passcode is required to unlock the smartphone, you will have to input the passcode.
Press the home button to close the Web browser
Turn on the Wi-Fi function in the setting
menu of the smartphone
Select the SSID displayed on the screen of this unit
Return to the home screen and start "Image App"
• When connecting with SSID and password
Turn on the Wi-Fi function in the setting menu of the smartphone
Select the SSID displayed on the screen of this unit
Enter the password displayed on this unit (First time connecting only)
Return to the home screen and start "Image App"
309
Operating the camera by connecting it to a smartphone
are not necessary when reconnecting.)
(→305)
(→305)
(→305)
Wi-Fi
SQW0547