Panasonic LUMIX DMC-ZS100 Owner's Manual page 99

Taking pictures after automatically setting the aperture value and shutter speed (Program AE Mode)
About Program Shift
The function for maintaining the same exposure (brightness) while changing the shutter
speed and aperture value combination is called "Program Shift". You can use "Program
Shift" to take pictures by adjusting the shutter speed and aperture value even in Program
AE Mode.
<Example of Program Shift>
1 2
(Aperture value)
2.0
2.8
4.0
5.6
8.0
11
1
1/2
Program Shift amount
Represents the aperture and shutter speed set automatically by the camera at each exposure
value.
Program Shift diagram
Represents the range of the aperture and shutter speed combination you can change with
Program Shift at each exposure value.
Program Shift limit
Represents the range of the aperture and shutter speed you can select when you use Program
Shift with the camera.
●
Program Shift cannot be used in the following cases:
• When recording 4K photos
• When recording using [Post Focus]
• When ISO sensitivity is set to [
99
3 4 5 6 7
1/4 1/15 1/60
1/8 1/30
]
8 9 10 11 12
1/250 1/1000
1/125 1/500 1/2000
Recording mode
(EV)
13 14
15
16
17
18
19
20
(Shutter speed)
1/4000
SQW0547