[Usb Mode]; [Tv Connection] - Panasonic LUMIX DMC-ZS100 Owner's Manual

For details on how to select the [Setup] menu settings, refer to (→65).

[USB Mode]

Select communication method for when connecting camera to a computer or printer with
USB connection cable (supplied).
Settings
[Select on connection]
[PictBridge(PTP)]
[PC]

[TV Connection]

Change the settings to be used when the camera is connected to a TV or other device.
■
[HDMI Mode (Play)]
Set the format for the HDMI output when playing back on the HDMI compatible high-
definition TV connected with this unit using the HDMI micro cable.
Settings
[AUTO]
[4K]
[1080p]
[1080i]
[720p]
[480p]
●
If no image appears on the TV with [AUTO], switch the setting to a constant setting other than
[AUTO] to set a format supported by your TV. (Please read the operating instructions for the TV.)
82
Select communication method each time you connect to a computer
or PictBridge-compatible printer.
Select when connecting to a PictBridge-compatible printer.
Select when connecting to a computer.
Automatically sets the output resolution based on information from a
connected TV.
Outputs pictures with a resolution of 3840×2160 pixels using a progressive
scan method for the number of effective scanning lines (2,160 lines).
Outputs pictures using a progressive scan method for the number of effective
scanning lines (1,080 lines).
Outputs pictures using an interlace scan method for the number of effective
scanning lines (1,080 lines).
Outputs pictures using a progressive scan method for the number of effective
scanning lines (720 lines).
Outputs pictures using a progressive scan method for the number of effective
scanning lines (480 lines).
Basics
Using the [Setup] menu
SQW0547