Pitney Bowes FastPac DI900 Operator's Manual page 39

DI900/DI950
Input Transport
(continued)
SV62081 Rev. A
DI900/DI950/DI950e Operator Guide Addendum
Adjusting the Stop on the Lower Divert Tray
Adjust the stop on the lower divert tray to the size of the material being fed
into the tray.
NOTE: The system must be stopped in order to perform this procedure. Opening
the covers while the system is running will cause an error.
1. Open the Input Transport covers.
2. Lift the blue lever and slide the stop to the position that corresponds with
the material size. Lower the stop into the appropriate slot to lock it in
place. The letter (11") and A4 slots are marked for your convenience.
3. Close the Input Transport covers.
9