Pitney Bowes FastPac DI900 Operator's Manual page 21

Job Options
(continued)
SV62081 Rev. A
DI900/DI950/DI950e Operator Guide Addendum
Insert Options (continued)
Menu Item Associated Options and Actions
Length is the •
dimension of the
insert in the direction
of the feed.
•
•
Additional Settings Double Detect allows the system sense when multiple inserts are
fed unintentionally.
NOTE: This menu option is not available when the job requires a
Custom Feeder.
•
•
•
•
Auto measure - measures the recommended length
automatically.
NOTE: Auto measure is not available when "Large Booklet" is
the selected insert or when the job requires a Custom Feeder.
Custom Length - allows increase or decrease of insert length.
- Use the UP/DOWN Arrow Keys to select number.
- Select "Accept" when done.
NOTE: If the job requires a Large Booklet, you must enter the
sheet length using this Custom Length option. The job will not
be valid if the booklet length is not entered.
Custom Length (Large Booklet Only) - allows selection of large
booklet size: 8.5" x 11" (215.9 mm x 279.4 mm) or 5.5" x 8.5"
(139.7 mm x 215.9 mm).
NOTE: If the job requires a Large Booklet, you must enter the
sheet length using this Custom Length option. The job will not
be valid if the booklet length is not entered.
Double Detect Feature allows you to toggle:
- Off means this feature will not function for this item, or
- On means this feature is active.
Location allows you to toggle:
- Default, or
- Custom.
Custom Location for Top Edge allows you to enter a specific
measurement (the distance from the edge feeding first into the
feeder) where the system should attempt to detect a double.
NOTE: Set this option when Location is set to "Custom". The
double detect region cannot be within 25 mm of the lead or trail
edges of the insert.
- Use the UP/DOWN arrow keys to adjust the measurement
(in millimeters).
- Select "Accept" when you are done.
Action On Double allows you to select where the items should
be fed to if a double is detected.
21