Pitney Bowes FastPac DI900 Operator's Manual page 19

Job Options
(continued)
SV62081 Rev. A
DI900/DI950/DI950e Operator Guide Addendum
Sheet Options (continued)
Menu Item Associated Options and Actions
Additional Settings. Feeder Type allows you to change the Feeder setting when
material is problematic, or to indicate that the job requires a Custom
(continued)
Feeder.
NOTE: This menu option is not available when the job requires an
Attached Printer.
•
•
•
Feeder Linking allows multiple Feeders to feed the same material.
NOTE: This menu option is not available when the job requires a
Custom Feeder or an Attached Printer.
•
•
NOTE: Scanned sheets can be linked vertically in both the High
Capacity Sheet Feeder and the Feeder Tower.
Scan Items allows you to indicate whether or not an item should be
scanned.
Toggle:
•
•
Normal is used for most items.
Manual Feed is used when items will be fed into the system
by hand. Refer to Manual Feeder in Chapter 2 for more
information.
Custom Feeder is used when items will be fed into the system
by the Custom Feeder.
None means there is no linking of Feeder Trays.
Two Feeders indicates that two Feeder Trays are linked and
feeding the same material.
Yes means this feature is active, or
No means this feature will not function for the item.
19