Pitney Bowes FastPac DI900 Operator's Manual page 10

DI900/DI950/DI950e Operator Guide Addendum
Creating a Job
(continued)
10
DI900/DI950 FastPac
Insert Type includes •
all items that do not
•
need folding or have
•
been pre-folded.
•
•
•
•
•
The following replaces the "Quantity" definition on page 3-36 of the DI900/
DI950 FastPac Document Inserting System Operator Guide:
™
Quantity is the •
number of this
•
particular insert to
include in each mail
piece.
NOTE: This menu •
option is not available
when "Large Booklet"
is the selected insert.
The following replaces the "Item Over Count Quantity" definition on page
3-38 of the DI900/DI950 FastPac
Guide:
Additional Settings •
(continued)
The following replaces the "Batch Mode" definition on page 3-39 of the
DI900/DI950 FastPac
Batch Mode Toggle:
•
•
Document Inserting System Operator Guide:
™
Reply Envelope - is also called a Business Reply Envelope.
Reply Card - is a thick slip.
Pre-folded Insert - is a sheet or set of sheets already folded
together.
Small Booklet - is a type of insert that typically has a bound or
stapled edge.
Slip - is single thickness document that fits into the outer
envelope without folding.
Generic - is an undeclared type of insert used by SwiftStart
jobs.
Large Booklet - is a type of insert that typically has a bound or
stapled edge.
NOTE: A Custom Feeder is required to feed this item.
Stiff Media - is a type of insert that is inflexible.
NOTE: The DI950e is required to feed this item. Once one (or
more) Stiff Media insert has been selected, the job requires an
outer envelope length of 6 in. (152.4 mm) to 7 in. (177.8 mm).
In addition, the manual lever for Stiff Media must be placed in
the flats position in order to run the job. Refer to Making Pre-
Run Adjustments in this document for more information.
1, 2, , , 5, 6
Custom Quantity
- Use UP/DOWN arrow keys to select number.
- Select "Accept" when done.
Variable - used with scanning-controlled jobs.
Document Inserting System Operator
™
Item Over Count Quantity is the number of inserts that cannot
be run normally.
Document Inserting System Operator Guide:
™
Off means this feature will not function for this job, or
On means this feature is active.
™
SV62081 Rev. A