Adjusting The Thread Trimmer -900/81; Resting Position Of The Roller Lever / Radial Position Of The Control Cam - Pfaff 1571 Adjustment Manual

Adjustment
15

Adjusting the thread trimmer -900/81

.06
15

Resting position of the roller lever / radial position of the control cam

.06.01
 Having made sure that piston 6 is positioned against the left stop, adjust magnet 1 (2 screws)
 Adjust control cam 3 (screws 4) in accordance with requirement 2.
40
Requirement
1. When the thread trimmer is in is resting position, lever 5 should be touching piston 6 and
the roller of roller lever 7 should be 0.3 mm away from control cam 3.
2. When the take-up lever is at t.d.c., control cam 3 should just have placed roller lever 7 in
its resting position.
1
Fig. 15 - 30
in accordance with requirement 1.
7
0,3 mm
6 5
4
3