Section 8: Running A Pattern Running A Pattern - Pfaff QUILT ARTIST II Manual

Section 8:
When running a pattern:
When you touch the green light to run a pattern you have
3 options:
Cancel because you didn't want to run the pattern
Ok to run the pattern from the start
Set start: If your pattern is only ½ fi nished and you need-
ed to re-start at a specifi c place, touch the "set start" but-
ton and move your machine to that point where you want
it to start and the machine will start from that point.
Once you press ok, the machine will move to the start
point and stitch once. You may then move your machine
and pull up your bobbin thread.
When you press ok, the machine will automatically move
back to the start point and do your selected lock stitch.
.
see pg 25 for lock stitches
After doing the lock stitches, it will run the pattern.
If your thread breaks or bobbin runs out of thread, while
running, touch the pause button on the screen and touch
thread break. Re-thread the machine or insert a full
bobbin, and move your machine to the place where the
thread broke. Don't worry if you're off the line a bit, the
machine will pull in to be exactly on the line. If that is
the place you want to start, touch yes, pull up the bobbin
thread and then start and it will continue from that point.
If your thread breaks or the bobbin runs out and you
don't notice until the pattern is completely fi nished, you
can easily restart. Re-thread the machine or insert a full
bobbin and touch the "Green Light" to run your pattern.
Now touch "Set Start" and move your machine to where
the thread broke. Your machine will start the pattern from
that place and continue on.
If you want to completely stop a pattern for any reason,
touch the pause button on the screen then the Red light at
the top of the screen.
37