Jacobsen Fairway 250 JGZZ250 Operation And Maintenance Manual page 60

8 MAINTENANCE & LUBRICATION
I
Interval
Daily
10 hours
Every 50 hours
Every 100 hours
Every 200 hours
Every 400 hours
Every 500 hours
Every Year
Every 800 hours
Every 1500 hours
Every 3000 hours
Every Two Years

The items marked
emission regulation. Being the owner of the engine, you are responsible for the performance of the
maintenance needed on the engine according to the above instruction.
Please read the details of the Engine Warranty Statement.

The items marked
*1 Air cleaner must be cleaned more frequently than shown above when it is used in dirty conditions
*2 After 6 cleanings
*3 Consult your local Kubota dealer for this service
*4 Replace only when necessary
Refer to Engine Manufacturers Manual for the Complete Engine Maintenance Procedures
en-59
ENGINE SERVICE INTERVAL CHART
Item

Check Oil Level.

Check Coolant Level.

Check Fuel Pipes and Clamp Bands.

Clean the Air Cleaner Element.

Clean Fuel Filter.

Check the Fan Belt Tension

Check Radiator Hoses and Clamp Bands.

Change Engine Oil and Replace Oil Filter Cartridge.

Check the Air Intake Hose.

Replace Fuel Filter Cartridge.

Remove the Sediment in Fuel Tank.

Clean Cooling System.

Replace the Fan Belt.

Replace the Air Cleaner Element.

Check for Damage to Electrical wiring and Connections.

Check the Valve Clearances.

Check the Injection Pressure of the Fuel Injection Nozzle.

Check Turbocharger.

Check Injection Pump.

Check Fuel Injection Timer.

Change Radiator Coolant.

Replace the Radiator Hoses and Clamp Bands.

Replace the Fuel Pipes and Clamp Bands.

Replace Air Intake Hose.
are registered as emission-related critical parts by Kubota in the U.S.EPA non road
must be done after the first 50 hours of operation
IMPORTANT
Section
8.2
8.4

*1 
8.8
8.3

8.2


8.7
8.7
8.4
8.3
*2 
8.8
*3 
*3 
*3 
*3 
8.4
*3 
*4 