Unit Transport Stops; Hourmeter; Reel Stop Lever - Jacobsen Fairway 250 JGZZ250 Operation And Maintenance Manual

6 CONTROLS
6.13

UNIT TRANSPORT STOPS__________________________________________

If you press the pedal (A) when you lift the cutting units,
the units 1 to 5 are lifted to the transport position.
If you press the pedal (B) when you lift the cutting units,
the units 6 and 7 are lifted to the transport position.
6.14

HOURMETER ____________________________________________________

The hour meter is found on the left of the steering tower
(A), above the parking brake. The meter records the
number of engine hours that have been run.
6.15

REEL STOP LEVER _______________________________________________

This control improves the movement of the cutting unit
over ground that is not level.
en-43