Vibration Level - Jacobsen Fairway 250 JGZZ250 Operation And Maintenance Manual

4 SPECIFICATIONS
4.3 MACHINE SPECIFICATION _____________________________________________
Frame construction:
Cutting unit drive:
Transmission:
Speeds:
Cutting:
Transport:
Steering:
Ground pressure:
Brakes:
Battery: Type 093 (SAE 500)
4.4

VIBRATION LEVEL ___________________________________________________

The machine was tested for hand/arm vibration levels. The operator was in the normal position to drive the
vehicle, with two hands on the steering mechanism. The engine was in operation and the cutting device was in
rotation, while the machine was not moving.
The Machinery Safety Directive 2006/42/EC
By compliance to:
The Lawnmower Standard BS EN ISO 5395
Referenced to Hand/Arm: BS EN ISO20643:2008
Information Supplied for Physical Agents Directive 2002/44/EC
By reference to:
Hand/Arm Standards: BS EN ISO 5349-1 (2001)
BS EN ISO 5349-2 (2002)
en-19
Heavy duty fabricated steel chassis with box section frame rails.
Fixed displacement hydraulic motors connected to the cutting unit.
On Demand 4-wheel drive. Direct coupled variable displacement pump to direct
coupled 475 cc in front (398 cc for POCLAIN Front Motors 305/405 Only),
338 cc rear wheel motors.
0 - 12 km/h Forward
0 - 6.4 km/h Reverse
0 - 14 km/h Forward
0 - 6.4 km/h Reverse
Hydrostatic power steering, with an adjustable tilt on the steering wheel.
1 kg/cm² (depends on the tyre pressures and the accessories installed)
250/305/405 Hydrostatic braking with Mechanical-type band parking brakes, 260
mm x 45 mm, on front wheels.
305/405 - POCLAIN Front wheel Motor Variant - Integral Wet Disc Type.