6-8 Setting How the Media Heating System Operates
Switching Off the Preheater, Print Heater, or Dryer
Procedure
PRE
W 1346mm
SETUP SHEET
ROLL
Description
This makes the temperature settings for the media heating system (preheater, print heater, and dryer), as well as
switching these devices on or off. When this is set to "OFF," these devices do not operate at all.
You can also make these settings on the computer. When you've made the settings on the computer, the computer's
settings take precedence and the printer's settings are ignored.
Default Setting
[PRE] (preheater): 35˚C (94˚F)
[PRINT] (print heater): 35˚C (94˚F)
[DRYER]: 50˚C (122˚F)
110
Chapter 6 Feature Reference
Press
35
35
OFF
Use
Press
Press
Press
Press
twice.
to select the device.
several times to select "OFF."
to enable the setting.
.
to go back to the original screen.