6-4 Accommodating Various Kinds of Media
How to Load Sheet Media
As with standard-size media, make sure of the following points when loading sheet media.
Procedure
Remove both shafts.
If roll media is loaded, then remove the media first.
Media
Lower the loading lever to secure the media in place.
If you're performing printing, attach the media clamps and close the front cover.
SETUP SHEET
PIECE
90
Chapter 6 Feature Reference
Align here
Use
Press
Pass the media through the machine.
Align the front edge of the media with the location shown
in the figure.
to select "PIECE."
.