Roland XC-540 User Manual page 117

Menu Items That Can Be Saved in Presets
[PRE] (Preheater)
[PRINT] (Print heater)
[DRYER]
P. 36, "Settings for the Media Heating System"
[EDGE DETECTION]
P. 86, "Using Transparent Media"
[SCAN INTERVAL]
P. 86, "Printing Hard-to-dry Media"
[VACUUM POWER]
P. 87, "Preventing Media from Coming Loose"
[FULL WIDTH S]
P. 88, "Speeding Up Output for Narrow Media"
[FEED FOR DRY]
P. 93, "Drying the Trailing Edge of the Printing Area on the
Dryer"
[ALTERNATE HEAD]
P. 94, "Giving Priority to Image Quality"
[CALIBRATION]
(in the CUTTING MENU)
P. 97, "Performing Distance Correction During Cutting"
[FORCE]
[SPEED]
[OFFSET]
[UP-SPEED]
P. 98, "Fine-tuning the Cutting Conditions"
[ADJUST BI-DIR SIMPLE SETTING]
P. 100, "Correcting for Misalignment in Bidirectional Printing"
[ADJUST BI-DIR DETAIL SETTING]
P. 101, "Correcting for Misalignment in Bidirectional Printing
More Precisely"
[CALIBRATION]
P. 103, "Performing Feed Correction to Alleviate Horizontal
Bands and the Like"
[PRINT-CUT ADJ.]
P. 104, "Correcting Misalignment of the Printing and Cutting
Up to eight types of presets can be saved. You can assign a name to each one. Using media names for these may aid
recognition and clarity.
P. 116, "Loading a Saved Preset," "Assigning a Name to a Preset"
6-10 Saving the Pinter Settings to Match the Media
Positions During Printing Followed Immediately by Cutting"
[CROP-CUT ADJ.]
P. 107, "Correcting Misalignment for Printing and Cutting When
Using Crop Marks"
[PREHEATING]
P. 111, "Determining How the Media Heating System Operates"
[BLOWER FAN]
P. 113, "Switching the Optional Blower-fan Unit On and Off"
Chapter 6 Feature reference 115