When Moving The Unit; Procedures From Preparing To Move Through Reinstalling - Roland XC-540 User Manual

5-6 When Moving the Unit

Procedures from Preparing to Move Through Reinstalling

To move the machine, you must completely drain all ink inside the machine and secure the print heads in place with
packing materials to protect them. Attempting to move the machine without first doing this may result in damage to
internal components due to leaking ink or damage to the heads.
This operation requires eight UNUSED SOL INK cleaning cartridges. Have these on hand before you start.
For information on how to remove and attach the various items, refer to the Setup Guide.
Important Notes on Moving
➢Be sure to use SOL INK cleaning cartridges. Use of any other type may result in breakdown.
➢Once the preparations for moving are complete, move the machine and fill it with ink with as little delay as
possible. Allowing the machine to stand without ink may damage the heads.
➢When moving the machine, keep it at a temperature between 5 to 40˚C (41 to 104˚F) and at relative humidity
between 20 to 80% (with no condensation). Failure to do so may result in breakdown.
➢Handle the machine with care when moving, keeping it level (not tilted at an angle) and preventing it from
striking other objects.
1.
Drain the ink and wash the interior.
–
MENU
SUB MENU
—
SUB MENU
INK CONTROL
˜
INK CONTROL
HEAD WASH
™
CLEANING LIQUID
IS REQUIRED
š
CHECK
DRAIN BOTTLE
›
Thereafter, follow the on-screen instructions to carry out the operations.
After cleaning has finished, switch off the sub power.
P. 62, "Disposing of Discharged Ink," p. 120, "Draining Ink and Performing Internal Washing"
Press .
Press several times.
Press .
Press twice.
Press .
Press twice.
Press .
Make sure the cleaning fluid is ready.
Press .
Press .
Discard the discharged ink in the drain bottle.
Attach the drain bottle and press
Be sure to discard the discharged ink.
.
Chapter 5 Maintenance and Adjustment 79