Operating The Appliance; Filling The Water Tank; Switching On The Appliance - Siemens HB36D.75. Instruction Manual

Clean the grease filter with hot soapy water or in the
dishwasher every time heavy dirt deposits have been left
behind after cooking.

Operating the appliance

In this section, you can read about
how to fill the water tank
■
how to switch the appliance on and off
■
what to note after each use
■
how you can use the recommended settings
■

Filling the water tank

When you open the appliance door, you will see the water tank
on the right-hand side.
Caution!
Use of unsuitable liquids may damage the appliance
Only use fresh tap water, softened water or uncarbonated
■
mineral water.
If your tap water is very hard, we recommend that you use
■
softened water.
Do not use distilled water, highly chlorinated tap water
■
(> 40 mg/l) or other liquids.
You can obtain information about your tap water from your
water supplier. The water hardness can be checked with the
test strips enclosed.
Fill the water tank before each use:
Open the appliance door and take out the water tank (fig. A).
1.
Fill the water tank with cold water up to the "max" mark (fig.
2.
B).
$
Close the tank cover until you feel it engage.
3.
Slide in the water tank all the way (fig. C).
4.
10
%
P D [
&
The tank must be flush with the water tank recess (fig. D).

Switching on the appliance

:
Risk of scalding!
When you open the appliance door and remove the cooking
containers, hot liquids may squirt out because the cooking
containers may have warped. When opening, do not stand too
close to the appliance. Open the appliance door carefully.
Remove the cooking container carefully. Keep children at a
safe distance.
Note: Always use the cooking container and wire rack in their
standard position (not the other way up).
Press the button to switch on the appliance.
‡
1.
The brand name logo appears on the display for approx.
4 seconds. The display then switches automatically to the
"Types of heating" menu.
Alternatively, press the
"
of heating" menu.
Turn the rotary selector to set the desired type of heating.
2.
  7\SHV RI KHDWLQJ
+RW DLU
Press the button.
¿
3.
The default temperature is highlighted.
'
button to go directly to the "Types
 ƒ&