Table of Contents
Advertisement
With HomeConnect
Touch "Set using the assistant".
1.
Further instructions can be found in section
2.
~ "Home Connect" on page 20
Cleaning the cooking compartment and
accessories
Before using the appliance to prepare food for the first
time, you must clean the cooking compartment and
accessories.
Cleaning the cooking compartment
To remove the new-appliance smell, heat up the
cooking compartment when empty and with the oven
door closed.
Make sure that there is no leftover packaging, such as
polystyrene pellets, in the cooking compartment and
remove the adhesive tape that is in or on the appliance.
Before heating the appliance, wipe the smooth surfaces
in the cooking compartment with a soft, wet cloth. Keep
the kitchen ventilated while the appliance is heating.
Apply the settings indicated.
Settings
Type of heating
4D Hotair
Temperature
maximum
Cooking time
1 hour
You can find out how to set the type of heating and the
temperature in the next section.
Switch off the appliance after the cooking time indicated
using the On/Off button.
After the cooking compartment has cooled down, clean
the smooth surfaces with soapy water and a dish cloth.
Cleaning the accessories
Clean the accessories thoroughly using soapy water
and a dish cloth or soft brush.
1Operating the appliance
Y ou have already learnt about the controls and how
O p e r a t i n g t h e a p p l i a n c e
they work. Now we will explain how to set your
appliance. You will learn about what happens when you
switch the appliance on and off, and how to select the
operating mode.
Switching the appliance on and off
Before you are able to set the appliance, you must
switch it on.
Exception: The childproof lock and the timer can be set
when the appliance is switched off.
Displays or information, e.g the residual heat indicator
in the cooking compartment, remain visible in the
display after the appliance has been switched off.
:
Switch off your appliance when you do not need to use
it. If no settings are applied for a long time, the
appliance switches itself off automatically.
Switching the appliance on
Use the On/Off button to switch the appliance on.
The on/off symbol above the button is illuminated in
blue.
The Siemens logo appears in the display, and then a
type of heating and a temperature.
You can specify which operating modes should
Note:
appear after the appliance is switched on in the basic
settings.
Switching off the appliance
Use the On/Off button to switch off the appliance.
The lighting above the button goes out.
A set function is cancelled.
The time appears in the display.
You can set whether or not the time should be
Note:
displayed when the appliance is switched off in the
basic settings.
Starting or interrupting operation
To start operation or to interrupt an operation which has
started running, press the Start/Stop button. The
cooling fan may continue to run after an operation is
interrupted.
Press the On/Off button to delete all settings.
If you open the cooking compartment door during
operation, operation is interrupted. Close the cooking
compartment door to resume operation.
You can change this setting in the basic settings.
Tip:
~ "Basic settings" on page 16
Selecting an operating mode
When you select an operating mode, the appliance
must be switched on.
Press the menu button.
1.
The operating modes menu opens.
Touch the required operating mode.
2.
Depending on the operating mode, different options
are available.
Use the rotary selector to change the selection.
3.
Depending on the selection, change further settings.
Use the start/stop button to start.
4.
The elapsed time appears in the display. The
settings and progress line can be seen.
Setting the type of heating and temperature
After the appliance is switched on, the set default type
of heating appears with the temperature. You can start
this setting immediately with the Start/Stop button. If
you want to set another type of heating, proceed as
follows.
For other settings, you can change the values as
follows:
Operating the appliance
en
13
Advertisement
Table of Contents
