Childproof lock
The appliance has a childproof lock to prevent children
switching it on accidentally or changing a setting.
Activating the childproof lock
Press and hold the
button for approx. 4 seconds until
@
the
symbol appears.
@
The control panel is locked.
Basic settings
Your appliance has various basic settings, which are preset at
the factory. You can change the basic settings as you require.
If you want to cancel all the changes, you can restore the
factory settings.
The appliance must be switched off.
Basic setting
Select language
Signal duration
Button tone
Display brightness
Clock display
Continue after door closed
Adjust individually
Display brand logo
Water hardness
Steam cooking heat signal:
Restore factory settings
Automatic switch-off
If you do not change the settings on your appliance for several
hours, the automatic switch-off function will be activated.
"Automatic switch-off" appears in the display.
Press any button to deactivate the automatic switch-off. You
can now make new settings.
Function
Changes the display language
Sets the length of the audible signal at the end of an opera-
tion
Switches on or off the audible signal that sounds when you
press a button
Changes display brightness
Displays the clock when the appliance is off
Not necessary to restart after the door has been opened
Sets programme cooking results to be generally higher or
lower
Switches the brand name logo display on or off when the
appliance is switched on
Sets the water hardness range for the descaling indicator
Audible signal at the end of the heating up phase during
steaming
Restores the appliance to the factory settings:
All changes to the basic settings are cleared
■
Memory is cleared
■
Automatic calibration is carried out again
■
Even with the childproof lock activated, you can switch the
appliance off, cancel the signal using the
operation using the Stop button and set the timer.
Deactivating the childproof lock
Press and hold the
@
button until the
You can make settings again.
Switch off the appliance.
1.
Press and hold the
button for approx. 4 seconds until
±
2.
"Select language" appears on the display.
Press the
button until the desired basic setting appears.
¿
3.
Turn the rotary selector to change the setting.
4.
Press and hold the
button for approx. 4 seconds to exit
±
5.
Basic settings.
The change is saved.
You can change the following basic settings:
button, stop
0
@
symbol disappears.
Possible settings
30 different languages
short / medium / long
off / on
day / medium / night
off / analogue 1 / analogue 2 /
analogue 3 / digital
off / automatic
7 levels -
ÙÙÙÙØÙ
+
on / off
softened / 1-soft / 2-medium / 3-
hard / 4-very hard
off / on
do not restore /
restore
19