Table of Contents
Advertisement
Cleaning the cooking compartment and
accessories
Before using the appliance to prepare food for the first
time, you must clean the cooking compartment and
accessories.
Cleaning the cooking compartment
To remove the new-appliance smell, heat up the
cooking compartment when empty and with the oven
door closed.
Make sure that there is no leftover packaging, such as
polystyrene pellets, in the cooking compartment and
remove the adhesive tape that is in or on the appliance.
Before heating the appliance, wipe the smooth surfaces
in the cooking compartment with a soft, wet cloth. Keep
the kitchen ventilated while the appliance is heating.
Apply the settings indicated.
Settings
Type of heating
4D Hotair
Temperature
maximum
Cooking time
1 hour
You can find out how to set the type of heating and the
temperature in the next section.
Switch off the appliance after the cooking time indicated
using the
button.
k
After the cooking compartment has cooled down, clean
the smooth surfaces with soapy water and a dish cloth.
Cleaning the accessories
Clean the accessories thoroughly using soapy water
and a dish cloth or soft brush.
1Operating the appliance
Y ou have already learnt about the controls and how
O p e r a t i n g t h e a p p l i a n c e
they work. Now we will explain how to set your
appliance. You will learn about what happens when you
switch the appliance on and off, and how to select the
operating mode.
Switching the appliance on and off
Before you are able to set the appliance, you must
switch it on.
Exception: The childproof lock and the timer can be set
when the appliance is switched off.
Displays or information, e.g the residual heat indicator
in the cooking compartment, remain visible in the
display after the appliance has been switched off.
Switch off your appliance when you do not need to use
it. If no settings are applied for a long time, the
appliance switches itself off automatically.
Switching the appliance on
Use the
button to switch the appliance on.
k
The
symbol above the button is illuminated in blue.
k
:
The Siemens logo appears in the display, and then a
heating mode and a temperature.
You can specify which heating mode should
Note:
appear after the appliance is switched on in the basic
settings. ~ "Basic settings" on page 18
Switching off the appliance
Use the
button to switch the appliance off.
k
The lighting above the button goes out.
A set function is cancelled.
The time appears on the display.
You can set whether or not the time should be
Note:
displayed when the appliance is switched off in the
basic settings. ~ "Basic settings" on page 18
Starting or interrupting operation
To start operation or to interrupt an operation which has
started running, press the
may continue to run after operation is interrupted.
Press the
button to delete all settings.
k
If you open the cooking compartment door during
operation, operation is interrupted. Close the cooking
compartment door to continue operation.
Selecting an operating mode
When you select an operating mode, the appliance
must be switched on.
Press the
button.
j
1.
The operating modes menu opens.
Touch the required operating mode.
2.
Depending on the operating mode, different options
are available.
Use the rotary selector to change the selection.
3.
Depending on the selection, change further settings.
Use the
u
button to start.
4.
The elapsed time appears in the display. The
settings and progress line can be seen.
Setting the type of heating and temperature
After the appliance is switched on, the set suggested
type of heating appears with the temperature. You can
start this setting immediately with the
want to set another type of heating, proceed as follows.
For other settings, you can change the values as
follows:
Example in the picture: Top/bottom heating at 180 °C.
Set the type of heating using the rotary selector.
1.
Operating the appliance
button. The cooling fan
u
u
button. If you
en
15
Advertisement
Table of Contents
