How To Change The Admin Pin - iStorage datAshur Pro User Manual

Admin PIN requirements:
• Must be between 7-15 digits in length
• Must not contain only repetitive numbers, e.g. (3-3-3-3-3-3-3)
• Must not contain only consecutive numbers, e.g. (1-2-3-4-5-6-7), (7-8-9-0-1-2-3-4), (7-6-5-4-3-2-1)
Instructions
1. Unlock the datAshur Pro with Admin PIN
2. Press the KEY button twice (double-click)
3. Within 10 seconds begin to enter your New User PIN
4. Press KEY button twice (double-click)
5. Within 10 seconds begin to re-enter the New User PIN
6. Press KEY button twice (double-click)

14. How to change the Admin PIN

Once an Admin PIN has been created, the datAshur Pro needs to be unlocked in Admin mode in order to change the Admin
PIN. The Admin PIN cannot be changed from the User mode.
Caution: Entering the Admin PIN to access a locked drive will clear the User PIN. For security reasons, we
highly recommend that a new User PIN be created immediately once the drive has been unlocked
using the Admin PIN. Refer to section 13 on page 11.
Admin PIN requirements:
• Must be between 7-15 digits in length
• Must not contain only repetitive numbers, e.g. (3-3-3-3-3-3-3)
• Must not contain only consecutive numbers, e.g. (1-2-3-4-5-6-7), (7-8-9-0-1-2-3-4), (7-6-5-4-3-2-1)
Instructions
1. Unlock the datAshur Pro with existing Admin PIN
2. Press and hold down the number 1 button and press the
KEY button twice (double-click) (1 &
3. Within 10 seconds begin to enter your New Admin PIN
4. Press KEY button twice (double-click)
5. Within 10 seconds begin to re-enter the New Admin PIN
6. Press KEY button twice (double-click)
Note: If a mistake was made while defining a new Admin PIN or the procedure was not completed, the drive
will retain the old Admin PIN.
#12
LED LED State
Red solid LED followed by a flickering
LED indicating successful Admin PIN entry
Blue LED blinking ready to receive new PIN
Blue LED continues to blink
Green
Green
Red LED quickly fades out to indicate
Off
successful creation of a New User PIN
LED LED State
Red solid LED followed by a flickering
LED indicating successful Admin PIN entry
Red and
&
) receive new Admin PIN
&
Red and
Green
Green
Red solid LED changing to a flickering
LED indicating successful Admin PIN change
www.istorage-uk.com
LED blinks
LED continues to blink
Blue LED's flicker together ready to
Blue LED's continue to flicker together
LED blinks
LED continues to blink
Green
Green
Green