How To Change Admin Pin - iStorage datashur User Manual

iStorage datashur · User Guide
3. Press button
4. Insert iStorage datashur into USB
port within 30 seconds
Note:
Green LED will blink for 30 seconds, within which time the drive needs to be connected to the
USB port, if no connection is detected within 30 seconds, the drive will lock and you will need
to start the process of unlocking again.

8. How to change ADMIN PIN

CAUTION
Changing the Admin PIN will reset the User PIN. A new User PIN
MUST be created immediately once the Admin PIN has been
changed.
PIN requirements:
• Must be between 7-15 digits in length
• Must not contain repeating numbers/letters, e.g., (3-3-3-3-3-3-3)
• Must not contain sequential numbers/letters, e.g., (1-2-3-4-5-6-7),
(7-8-9-0-1-2-3-4-5-6), (7-6-5-4-3-2-1)
Once an Admin PIN has been created, the datashur needs to be unlocked by
the administrator in order to change the Admin PIN. The Admin PIN cannot be
changed from user mode.
26
Green will double blink if admin
entered correct PIN Red will blink if
incorrect PIN was entered If Red and
Green LEDs blink alternately, restart
from step #1
Green LED will illuminate in constant
state Blue will illuminate and flicker