How To Change The Admin Pin - iStorage datAshur PRO+C User Manual

iStorage datAshur® PRO + C

16. How to change the Admin PIN

Once an Admin PIN has been created, the datAshur
PRO C needs to be unlocked in Admin mode in order
+
to change the Admin PIN. The Admin PIN cannot be
changed from the User mode.
C with existing Admin PIN
1. Unlock the datAshur PRO
+
GREEN LED will flicker indicating successful Admin PIN entry.
3. Enter your new 8-15 digit Admin PIN
RED and BLUE LEDs will continue to flicker together.
5. Re-enter your new Admin PIN
GREEN LED will continue to blink.
Note: If a mistake was made while defining a new Admin PIN or the procedure was not completed,
the drive will retain the old Admin PIN.
Caution: Entering the Admin PIN to access a locked drive will
clear (delete) the User PIN.
PIN Requirements:
• Must be between 8-15 digits in length
• Must not contain only repetitive numbers, e.g. (3-3-3-3-3-3-3-3)
• Must not contain only consecutive numbers, e.g. (1-2-3-4-5-6-7-8),
(7-8-9-0-1-2-3-4)
2. Press and hold down the number 1 button and press the
KEY button TWICE (double click)
Flickering GREEN LED switches to RED and BLUE LEDs flickering together
ready to receive new Admin PIN.
4. Press KEY button TWICE (double click)
RED and BLUE LEDs will switch to a blinking GREEN LED.
6. Press KEY button TWICE (double click)
Solid RED LED switches to a flickering GREEN LED indicating successful
Admin PIN change.
23
User Manual v1.0