How To Use The Datashur Pro For The First Time; How To Change The User Pin - iStorage datAshur Pro User Manual

Hide thumbs Also See for datAshur Pro:
Table of Contents

Advertisement

3. How to use the datAshur Pro for the first time

The datAshur Pro is shipped with a default User PIN of 11223344 and although it can be used straight out of the box with
the default PIN, for security reasons we highly recommend a new User PIN be created immediately by following
the instructions under section 4 'How to change the User PIN'.
Please follow the 3 simple steps in the table below to unlock the datAshur Pro with the default User PIN.
Instructions - first time use
1. Press KEY button once
2. Within 10 seconds begin to enter User PIN
(default - 11223344) to unlock datAshur Pro
3. Press KEY button once
Note:
Once the datAshur Pro has been successfully unlocked, the
for 30 seconds only, during which time the datAshur Pro needs to be connected to a USB port. It can be locked
down immediately by pressing and holding down the KEY button
seconds to expire or by clicking the 'Safely Remove Hardware/Eject' icon within your operating system.

4. How to change the User PIN

PIN requirements:
Must be between 7-15 digits in length
Must not contain only repetitive numbers, e.g. (3-3-3-3-3-3-3)
Must not contain only consecutive numbers, e.g. (1-2-3-4-5-6-7), (7-8-9-0-1-2-3-4), (7-6-5-4-3-2-1)
Password
Tip: You can create a memorable word, name, phrase or any other Alphanumerical PIN combination
by simply pressing the key with the corresponding letters on it.
Examples of these types of Alphanumerical PINs are:
For "Password" you would press the following keys:
7 (pqrs) 2 (abc) 7 (pqrs) 7 (pqrs) 9 (wxyz) 6 (mno) 7 (pqrs) 3 (def)
For "iStorage" you would press:
4 (ghi) 7 (pqrs) 8 (tuv) 6 (mno) 7 (pqrs) 2 (abc) 4 (ghi) 3 (def)
Using this method, long and easy to remember PIN's can be created.
#6
LED
LED State
Red,
Green
and then the
Red
LED will continue to blink
Red
solid LED changing to
indicating successful default User PIN entry
Green
for 3 seconds, or waiting for the 30
www.istorage-uk.com
&
Blue
LED's will flash together once
Red
LED will continue to blink
Green
solid LED
LED will remain on and in a solid state

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the datAshur Pro and is the answer not in the manual?

Questions and answers

Daniel Carter
January 21, 2025

I have not used my datashur for several months and have forgotten my password how can I recover access

1 comments:
Mr. Anderson
February 10, 2025

If you forget the User PIN, you can use the Admin PIN to unlock the drive and set a new User PIN. However, if you forget both the User and Admin PINs, there is no way to recover access to the data. In such a case, you must reset the datAshur PRO. The reset process deletes all data, clears the User and Admin PINs, and creates a new encryption key, reverting the device to the default User PIN of "1-1-2-2-3-3-4-4".

This answer is automatically generated

Daniel Carter
January 21, 2025

how can I recover my password

1 comments:
Mr. Anderson
February 10, 2025

To recover your password for the iStorage datAshur Pro, you cannot retrieve the existing password. Instead, you must reset the device, which will delete all data and create a new encryption key. Follow these steps to reset the device:

1. Press and hold the number 7 button, then press the Key button once and release both buttons.
2. Enter 9-9-9.
3. Press and hold the number 7 button again, then press the Key button once and release both buttons.

After completing these steps, the red LED will fade out, indicating the reset process is complete. The device will revert to the default user PIN (1-1-2-2-3-3-4-4) and must be reformatted before use.

This answer is automatically generated

Daniel Carter
January 21, 2025

How can I recover a forgotten password

1 comments:
Mr. Anderson
February 10, 2025

To recover a forgotten password for the iStorage datAshur Pro, you must reset the device. This process deletes all data, reverts the user PIN to the default (1-1-2-2-3-3-4-4), and forces the creation of a new encryption key. The device will also need to be reformatted. Follow these steps:

1. Press and hold the number 7 button, then press the Key button once and release both buttons.
2. Press 9-9-9.
3. Press and hold the number 7 button again, then press the Key button once and release both buttons.

Once the reset is complete, the red LED fades out.

This answer is automatically generated

Subscribe to Our Youtube Channel

Table of Contents

Save PDF