Control Panel Technical Specifications - jablotron JA-82K OASiS Installation Manual

11

Control panel technical specifications

External power source 230 V / 50 Hz, max 0.1 A, CLASS PROTECTION II
Power supply
Backup-battery 12 V, 1,3 to 2,2 Ah, typical battery lifetime approx. 5 years
Maximum recharge time
Backup power output (+U terminal)
Number of combination (51 users) -
Number of wireless device addresses
Communications frequency (JA-82R)
Number of hard-wired inputs
double balanced inputs, with triggering and tamper functions
(each wireless detector blocks the hard-wired input to which it is assigned)
External warning output EW*
Internal warning output IW*
Programmable outputs*
Event memory 255 latest events, including date and time stamping
Intruder alarm signal or message
Tamper signal or message
Wrong authorization code alarm signal or message
Fault signal or message
Security grade 2 according to EN 50131-1, EN 50131-6, and EN 50131-5-3
Environmental class
Radio emissions
EMC
Safety
Can be operated according to
* These signals are also transmitted wirelessly to wireless sirens and AC
and UC receiver modules.
JABLOTRON ALARMS a.s.. hereby declares that the
JA-82K(R) "OASiS" control panel is in compliance with the
essential requirements and other relevant provisions of
Directive 1999/5/EC.
assessment can
www.jablotron.com, Technical Support section.
Note: Dispose of batteries safely depending on battery type
and local regulations. Although this product does not contain
any harmful materials we suggest you return the product to
the dealer or directly to the manufacturer after use.
Description: 1. antenna connector; 2. wireless module; 3. the heart beat LED; 4. wired-zone module; 5; antenna for wireless module; 6. AC power
terminals; 7. terminals; 8. back up battery; 9. digital bus connector; 10. GSM antenna; 11. mains fuse (T200 mA); 12. transformer; 13. box cover
tamper contact; 14. GSM communicator; 15. GSM communication LED; 16.SIM Card
JA-82K control panel installation manual
type A (EN 50131-6)
maximum continuous load 0,4 A
intermittent load 1 A for 15 min's max.
code + card: 1 075 970
50 (requires a JA-82R module)
868 MHz ISM band
4 (up to 14 if the JA-82C is plugged in)
switching to GND, max. 0.5A
switching to GND, max. 0.5A
PGX, PGY max. 0.1 A, switching to GND
after 1 or 2 events (adjustable)
after 1 event
after 10 events
after 1 event
II. indoor-general
(-10 to +40°C) compliant with EN 50131-1
ETSI EN 300 220
EN 50130-4, EN 55022
EN 60950-1
ERC REC 70-03
The original of the conformity
be found on the web
72 hours
site
fig. 17 Control panel box layout
- 16 -
fig. 16 Control panel box dimensions
MKH51102