Loading The Slide Mount Holder - Sh-U1; Loading The Aps Adapter Ad-10 (Sold Separately) - Minolta DiMAGE Scan Elite II Instruction Manual

LOADING THE FILM HOLDER

Loading the Slide Mount Holder - SH-U1

• The slide mount holder SH-U1 accommodates up to four slides. Slide mounts must be thicker than
1 mm and thinner than 2 mm to be used in the holder. Do not use glass mounted slides. APS
slide mounts can be used.
1
Hold the slide mount holder so that
the slide slots are to the top and
the frame numbers are up-side-
down and face up.
2
Insert slides into the slots with the
emulsion down.
• When inserting slides, the frame number or
date printed on the slide mount should be face
up.
• Horizontal images should be inserted up-side-
down.
CAUTION
To scan the entire image area, the slides must be
inserted horizontally in the holder, not vertically.
Loading the APS Adapter - AD-10 (SOLD SEPARATELY)
APS (Advanced Photo System) cassette film can be scanned with the optional APS adapter AD-10.
1
Slide the film-chamber
release toward the top of the
adapter until the film-
chamber door opens.
• The film-chamber release does not
return to its original position until the
film-chamber door is closed.
2
Insert the film cassette into
the film chamber as shown.
• Only load cassettes with the number 4
( ) mark highlighted in white.
3
Close the film-chamber door.
• The film-chamber door will not close if
any other mark other than number 4 is
highlighted. Never force the door shut.
24
Film-chamber release
Film-chamber door
Mark
The white mark
indicates the film is
developed.
Scanner contacts
(Do not touch)