Table of Contents
Advertisement
2.INSERTING THE FILM
2.1. Film Strip
Frames 1 through 3 should be
placed right side up and frames
4 through 6 upside down so that
the film fits in the holder.
2.2. Slide Mount
The QuickScan 35 can scan both color and monochrome (black &
white), positive and negative 35mm film. Both film in slide mounts
and film strips cut to a maximum of 6 frames can be scanned.
The surface of the front and back of the film is different. The front
is the base which has a glossy surface and the back is the
emulsion which has a slight matte surface. Film must be inserted
with the emulsion side facing right.
Film strip must be placed in the film holder before inserting it into
the scanner. The film holder accepts film strips up to 6 frames
long.
1. Open the film holder.
2. Place the film on the film holder with the emulsion side down.
3. Align the frame you want to scan within the open area.
4. Snap the film holder closed.
5. Insert the film holder into the scanner film slot with the white
lettering facing left.
The slide mount can be inserted as is.
Insert the slide mount, narrow end first, with the emulsion side
facing right.
16
Advertisement
Table of Contents
