Loading The Film Holder; Loading The 35Mm Film Holder - Fh-U1 - Minolta DiMAGE Scan Elite II Instruction Manual

2. LOADING THE FILM HOLDER

Using the included holders, the DiMAGE Scan Elite II can scan mounted or unmounted...
• Color negatives
• Black and white negatives
APS (Advanced Photo System) film can also be scanned using the optional APS adapter AD-10.
CAUTION
Remove any dust from the film before placing it in the film holder. Only use brushes or com-
pressed air specifically for photographic film. Do not blow on the film with your mouth, or use tis-
sue paper or your fingers to wipe the film. Always hold the film by the edges.

Loading the 35mm Film Holder - FH-U1

The 35mm film holder FH-U1 accommodates film strips with up to six frames. The horizontal
images should be orientated in the same direction as the frame numbers on the film holder.
1
Lift the film cover on the FH-U1 by the
tab near the number six frame.
2
Place the film in the film holder with
the emulsion down.
• If the frame numbers on the edge of the film near the
sprocket holes are reversed, the film's emulsion side
is up. Turn the film over.
• Align the film frames with the holder frames.
3
Insert the two tabs on the left side of
the film cover into the holes in
the holder base. Carefully
lower the cover taking care
not to move the film. Snap
the film cover closed by
pressing the two "PUSH" marks.
• Color positives
• Black and white positives
23