Minolta DiMAGE Scan Elite II Instruction Manual page 73

6
Adjust or move the Digital-GEM sample area to select the image area
to be used to evaluate the Digital-GEM correction.
• Choose a smooth uniform area to evaluate. Skin is a good subject.
• Using the mouse, place the pointer over the corners or sides of the GEM sample area
frame; the pointer will change to a double arrow. Simply click and drag the edge of the frame
to adjust the area. By placing the pointer in the center of the frame, the pointer will changed
to a four-pointed arrow. Simply click and drag the entire frame over the image area. With
the pointer is outside the frame, click and drag to define a new sample area. To extend the
area over the entire image, press control+A (Windows) or command+A (Macintosh).
7
Click the apply Digital-
GEM button
the Digital-GEM effect on
the sample area.
• Every time the Digital-GEM sample
area is changed, or the degree of
correction is adjusted, press the
apply Digital-GEM button to view
the results.
• The Digital-GEM sample image can
be magnified by clicking the fit-to-
window button.
8
Click the scan button
• For the operation after performing the final scan, see page 81.
• The results with Digital GEM depends upon the condition of the film.
• To turn off Digital GEM, click the Digital-GEM button again.
Without Digital GEM
to preview
to save the final image.
Digital-GEM sample display
With Digital GEM
73