Loading 35Mm Film Holders; Slide Mount Holder Sh-M1 - Minolta Dimage Scan Multi Hardware Manual

SLIDE MOUNT HOLDER SH-M1

• The slide mount holder can hold up to 4 mounted slides (35mm or APS).
• Slide mounts must be thicker than 1mm and thinner than 2mm to fit properly into the holder.
• Results of scanning glass-mounted slides can be unpredictable.
• Blow dust off the slide before placing it into the film holder.

LOADING 35MM FILM HOLDERS

15
1. Position the slide mount
holder so the white arrow is
on the top-left side, then open
the slide mount.
• Open the slide holder by pushing up
on the two tabs from underneath.
2. Place the slides within the
indentations, making sure
they lie flat.
• Insert the slides emulsion side down.
3. Press the cover firmly closed
until it clicks.