Using Job Files - Minolta DiMAGE Scan Elite II Instruction Manual

USING JOB FILES

The Standard Scan Utility contains approximately 110 preinstalled Job files to cover a wide range of
image use.
1
Click the load Job button
• The Job-selection dialog box will appear.
2
Select a category from the drop-down
list.
3
Click a Job file name to select it. Click
[OK] to apply the Job to the image.
• The scan settings of the selected Job file are displayed
on the right side of selection window.
• The Job names can be listed chronologically or
alphabetically. Click the name or date option radio
button to sort the Job files.
• When the Job file is loaded, the cropping frame will
automatically appear on the image. The frame is
proportional to the output type specified. The frame can
be resized, but the proportions of the frame will remain
the same. The input and output data are also
automatically adjusted to match the change of the
cropping frame.
• Once made, scan settings remain in effect until
changed.
.
75