Quitting The Standard Scan Utility - Minolta DiMAGE Scan Elite II Instruction Manual

Quitting the Standard Scan Utility

To turn off the scanner at the end of a scanning session, following steps 1 through 4. To restart the
computer, following steps 1 through 3.
1
Quit the Standard Scan Utility software or close Photoshop
Elements.
2
Press the eject button to unload the film holder or APS adapter.
• The scanner automatically ejects the 35mm film or slide
mount holder to the initial inserting position. Do not touch
or hinder the holder while it is moving.
• When using the optional APS Adapter, the scanner
automatically rewinds the film when the eject button is
pressed. Do not remove the adapter until the rewind
motor has stopped.
3
Close the front door.
4
Press the main switch to turn off the
scanner.
• Unplug the scanner when cleaning or when the product is
not in use for extended periods.
• When using the IEEE 1394 cable with Windows Me,
complete the "Unplug or eject hardware" operation by
double-click on the "Unplug or eject hardware" icon on
the task bar before turning off the scanner (see page
87). This step is unnecessary if the computer is
shutdown before turning off the scanner.
85