Minolta DiMAGE Scan Elite II Instruction Manual page 7

CAUTION
Basic operation:
• Damage or injury through fire or electric
shock may result if the product is used or
stored in the following conditions:
In humid or dusty environments.
In direct sunlight or hot environments.
In smoky or oily areas.
In unventilated areas.
On unstable or unlevel surfaces.
• Store this product out
of reach of children.
Be careful when
around children, not to
harm them with the
product or parts.
• If the product emits a
strange odor, heat, or
smoke, discontinue
use. Immediately
unplug the power cord
taking care not to burn
yourself. The contin-
ued use of a damaged
product or parts may
cause injury or fire.
• This product should
only be operated in the
upright position.
Inappropriate place-
ment may result in fire.
• The required operating environment must be
between 10°C and 35°C with less than 80%
humidity. A sudden change in temperature can
cause condensation inside the product, which
may result in electric shock or fire. When the
product is subjected to a drastic change in tem-
perature, allow the product time to come to
equilibrium with the surrounding environment.
Power supply:
Disconnect power supply
when not in use.
Additional cautions:
• Do not move, obstruct, or touch the film hold-
er when scanning. The product or scanned
images can be damaged.
• Do not use a brush or air brush to clean the
interior of the product.
• Insert the plug
securely into the elec-
trical outlet.
• Do not obstruct
access to the AC
adapter; this can hin-
der the unplugging of
the unit in emergen-
cies.
• Do not cover the AC
adapter. A fire may
result.
• Periodically check
that the power cord is
not damaged and the
plug is clean. Dust
and dirt that may col-
lect between the
prongs of the plugs
may result in fire.
• Do not use if the cord
is damaged.
• Unplug the product
when cleaning or
when the product is
not in use for long
periods.
7