Macintosh - Minolta DiMAGE Scan Elite II Instruction Manual

INSTALLING DRIVER SOFTWARE - MACINTOSH
1
Turn on the computer to start the Mac OS.
2
Insert the DiMAGE Scan Elite II CD-ROM into the CD-ROM drive.
• Dimage Scan Elite2 CD-ROM icon will appear on the desktop.
3
Double-click on the DiMAGE Scan Elite 2 icon.
• The driver, manual, and acrobat reader folders will appear.
4
Double-click on the driver folder.
• The language folders will appear.
5
Open the English language
folder, then double click on the
DS Elite 2 installer.
• The installer's start-up screen will appear.
6
Click [Continue] on the installer screen to
begin the installation routine.
7
The end-user license agreement will
appear. If you accept the terms of the
agreement, click [Accept] to continue the
installation routine.
• If you do not agree to the conditions stated in the end-
user license agreement, click [Decline] and the software
will not be installed.
8
At the bottom left of the installer screen,
specify the location in which the software
will be installed. To change the designated
location, use the install-location menu; this
menu can be used to select an existing
location or create a new folder.
12