Table of Contents
Advertisement
LOADING THE FILM HOLDER
Three types of holder are supplied with this scanner. Select the appropriate one according to
the film type to be scanned.
• 35 mm film holder FH-P1
• Slide mount holder SH-P1
• Universal holder UH-P1
35MM FILM HOLDER FH-P1
Use the FH-P1 for 35mm negatives and unmounted 35mm
slide film.
• The 35mm Film Holder FH-P1 can hold film strips up to 6
frames long.
• Blow dust off the film before placing it into the film holder.
1. Position the film holder so the
white arrow is on the top-left side,
then open the slide mount.
• Open the slide holder by pulling up
the tab from underneath.
2. Place the film in the film
holder emulsion side down.
• Make sure the film strip is under
the two nouches at the top of
the holder.
3. Align the frames within the
scanning windows.
4. Close the cover and press
firmly until it clicks.
DiMAGE Scan Multi PRO
31
Advertisement
Table of Contents
