Table of Contents
Advertisement
UNIVERSAL
HOLDER
DRIVE BELT
DRIVEN PULLEY SUB ASS'Y
DRIVEN PULLEY SUB ASS'Y
LH. CRANKCASE COVER/CONTINUOUSLY VARIABLE TRANSMISSION
DRIVE BELT
REMOVAL
● Remove the LH. crankcase cover. (⇨7-2 )
● Hold the clutch outer using the universal holder and
● Remove the clutch outer.
● Squeeze the drive belt into the pulley groove as shown
● Loosen the drive face setting nut 12mm with the clutch
● Remove the kick starter ratchet and drive face.
● Remove the driven pulley sub assembly with the drive
● Remove the drive belt from the driven pulley groove
remove the nut.
TOOL: UNIVERSAL HOLDER
·Use the special tool when loosening the lock nut.
Holding the rear wheel or rear brake will damage the
final reduction system.
so that it slackens enough to remove the driven pulley
from the drive shaft.
center holder.
TOOL : DRIVE FACE HOLDER
belt in place.
and drive pulley groove.
7-3
Hide quick links:
Advertisement
Chapters
Table of Contents
