Rear Cushion - DAELIM S2 125 Service Manual

REAR WHEEL / BRAKE / SUSPENSION / SWING ARM
REAR CUSHION ADJUST
● Adjust the cushion spring according to the load
● The rear cushion can be adjusted as below.

REAR CUSHION

REMOVAL
● Remove the luggage box.
● Remove the air cleaner.
● Remove the upper bolt.
● Remove the lower bolt.
● Remove the rear cushion.
INSTALLATION
● Install in the reverse order of removal.
REAR SWING ARM
REMOVAL
● Remove the EX. muffler. (⇨3-8 )
● Remove the rear brake caliper. (⇨13-3 )
● Loosen the flange bolt securing the RH. crank case
● Loosen the rear axle U-nut.
● Remove the rear swing arm.
condition.
1 - 2 - 3 -
soft medium
TORQUE VALUE : 3.92kgf·m
cover.
4 - 5
hard
13-7