Reserved; Temperature; Version - SGM Giotto 1500 Instruction Manual

SGM
Reserved functions

RESERVED

Temperature

TEMPERATURE

Version

VERSION VERSION
User's manual 1.02
RESERVED
Some fixture functions cannot be accessed by operators as they regard
software sections as yet to be defined in this firmware release. When
RESERVED appears on the display, you are in this section. Access is
forbidden.
TEMPERATURE
This menu allows to display the internal temperature detected in many
points of the fixture and measured both in Celsius and Fahreneit degrees.
Thanks to a sophisticated software, Giotto 1500 is able to activate internal
projections with the aim of avoiding overheating. The internal temperature
are kept fixed through the fans electronic control and the lamp power.
To check the internal temperature, proceed as follows:
1. Connect Giotto 1500 to the power supply, wait that the reset operation
are completed.
2. Use the DIAL to find "TEMPERATURE" menu.
3. Press ENTER to confirm.
4. Use the DIAL to select the temperature to be checked.
5. Press ESC to exit the menu.
VERSION
Only for reading, this menu allows to check the information on the
microprocessors software versions used on the fixture.
To check the software version, proceed as follows:
1. Connect Giotto 1500 to the power supply, wait that the reset operation
are completed.
2. Use the DIAL to find "VERSION" menu.
3. Press ENTER to confirm.
4. Use the DIAL to visualize the software installed on the microprocessors.
5. Press ESC to exit the menu.
- 62 -
GB
Giotto 1500