Installing / Replacing The Lamp - SGM Giotto 1500 Instruction Manual

GB
I /
NSTALLING REPLACING THE LAMP
ATTENTION!
1200 FAST FIT. NEVER USE ANY OTHER TYPES OF LAMPS.
DISCONNECT THE POWER SUPPLY BEFORE CARRYING OUT ANY WORK ON THE FIXTURE.
MAKE CERTAIN THAT THE FIXTURE IS OFF AND THE TEMPERATURE OF THE COMPONENTS CAN'T
CAUSE BURNS (WAIT AT LEAST 30 MINUTES AFTER SWITCHING OFF).
NEVER CARRY OUT ANY WORK IF THE FIXTURE DOESN'T HAVE ITS PROTECTIVE COVERS OR ITS
LENSES ARE DAMAGED.DISCHARGE LAMPS CAN EXPLODE.
NEVER LOOK DIRECTLY AT THE LAMP WHEN IT'S LIT - DISCHARGE LAMPS EMIT UV RAYS
WHICH ARE DANGEROUS FOR SIGHT.
Inside the fixture's moving head, there is an optical system. Follow the herebelow instructions
when installing or replacing a lamp.
1
2
Pict. 1
1. Through a screwdriver loosen the screws shown in Pict. 1 with numbers 1 and 2.
2. Wheel anticlockwise and take the lid off Pict. 2
3. Wheel the lamp anticlockwise and take it off to replace it.
4. Don't touch the lamp bulb barehanded. Always use a cloth or gauntlets to handle the lamp
during installation or removal operation.
Giotto 1500
This fixture is designed exclusively for use with PHILIPS MSR GOLD
Pict. 2
- 31 -
Pict. 3
User's Manual 1.02
SGM
Pict. 4