Profile Configuration - SGM Giotto 1500 Instruction Manual

SGM
Menu
DMX SETUP
ADDRESS XXX Range 001-456
ON
WIRELESS
OFF
WIRELESS LOGOFF SET
ON
WIRELESS EXIT
OFF
Range 8-
600sec
DMX DELAY
UNL
DMX
SIGNAL
RS-232
ARTNET SETUP
IP ADDRESS1 IP ADDRESS1=0
IP ADDRESS2 IP ADDRESS2=0
IP ADDRESS3 IP ADDRESS3=0
IP ADDRESS4 IP ADDRESS4=0
SUBNET
SUBNET MASK1
MASK1=0
SUBNET
SUBNET MASK2
MASK2=0
SUBNET
SUBNET MASK3
MASK3=0
SUBNET
SUBNET MASK4
MASK4=0
SUBNET SUBNET=0
UNIVERSE UNIVERSE=0
PAN-TILT SETUP
NORMAL
PAN MOVE
REVERSE
PAN POS MIN Range 000-526
PAN POS MAX Range 004-530
NORMAL
TILT MOVE
REVERSE
TILT POS MIN Range 000-246
TILT POS MAX Range 004-250
ON
PAN TILT SWAP
OFF
16
PAN TILT RES
8
TRACKING
SPEED CONTROL
VECTOR
100% - 92%
SPEED
84% - 76%
Fast
ACCELLERATION
Slow
User's manual 1.02
PROFILE
Option
Fixture addressing
Enables the DMX WIRELESS
Disable the DMX WIRELESS.
Disable the previous WIRELESS setting.
Enables the wireless signal output on the DMX OUT port.
Disables the wireless signal output on the DMX OUT port.
It's possible to set the number of second for which the fixture's
last operating status must be held when there is no DMX signal.
Always maintains the fixture's last operating status no matter
for how long there is no DMX signal.
DMX signal selected.
Automatic selection of the signal.
RS-232 signal selected.
Automatic selection of the signal.
Set up first byte ip address for Artnet network
Set up second byte ip address for artnet network
Set up third byte ip address for Artnet network
Set up fourth byte ip address for Artnet network
Set up first byte subnet mask for Artnet network
Set up second byte subnet mask for Artnet network
Set up third byte subnet mask for Artnet network
Set up fourth byte subnet mask for Artnet network
Set up subnet for Artnet network
Set up universe for Artnet network
Normal PAN control of left to right PAN movement.
Inverted PAN movement control (from right to left).
Sets PAN movement start position. Default configuration = 000
degrees.
Sets PAN movement stop position. Default configuration = 530
degrees.
Normal control of TILT from up to down.
Inverted TILT movement control (from down to up).
Sets TILT movement start position. Default configuration = 000
degrees.
Sets TILT movement stop position. Default configuration = 250
degrees.
Data regarding Pan controls Tilt and vice versa.
Normal control of Pan and Tilt movement.
bit bitEnable the Pan\Tilt movement resolution 16 bit.
bit bitEnable the Pan\Tilt movement resolution 8 bit.
Traking operating mode. Mspeed channel is disabled.
Vector operating mode. Mspeed channel is enabled.
Allows to slow maximum Pan and Tilt speed.
Default configuration = 100%
Optimises speed performance.
Optimises smooth movement.
CONFIGURATION
Description
- 44 -
GB
Giotto 1500