Page 2
Nell’ottica di qualità SGM, è possibile che l’Azienda apporti migliorie ai suoi prodotti, per cui consigliamo di alle- gare il manuale al prodotto stesso e di trascrivere il numero di serie nell’ultima pagina della copertina: utilizzando il presente manuale con un apparecchio fabbricato prima o dopo la sua stampa, potrebbero esserci discrepanze fra l’apparecchio e quanto riportato nel manuale stesso.
SGM Technology for Lighting Table of Contents INTRODUCTION:......................2 Features ............................. 2 SAFETY INSTRUCTIONS ....................3 GENERAL GUIDELINES ..................... 4 INSTALLATION INSTRUCTIONS ..................4 a) Installing or replacing the lamp ....................4 b) Mounting the device......................... 6 Installation method via clamp ....................... 7 DMX-512 control connection......................
SGM Technology for Lighting KEEP THIS MANUAL FOR FUTURE NEEDS For your own safety, please read this user manual carefully before installing the device. CAUTION ! Keep this device away from rain and moisture! Unplug mains lead before opening the housing...
SGM Technology for Lighting SAFETY INSTRUCTIONS CAUTION Be careful with your operations. With a dangerous voltage you can Suffer a dangerous electric shock when touching wires! This device has left the factory in perfect condition. In order to maintain this condition and to ensure a safe operation, it is absolutely necessary for the user to follow the safety instructions and warning notes written in this user manual.
SGM Technology for Lighting GENERAL GUIDELINES This device is a lighting effect for professional use on stages, in discotheques, theatres, etc. This fixture is only allowed to be operated with the max alternating current which stated in the technical specifications in the last page of this manual, the device was designed for indoor use only.
Page 7
SGM Technology for Lighting For the installation, you need one Philips MSD 250/2: Procedures: Unscrew the 2 screws (A, B) on the bottom of the housing, holding the plate where the lamp is underneath. Gently pull the socket holder using the knob in the middle.
SGM Technology for Lighting b) Mounting the device CAUTION Pleas consider the EN 60598-2-17 and the other respective national norms during the installation. The installation must only be carried out by a qualified person. The installation of the effect has to be built and constructed in a way that it can hold 10 times the weight for 1 hour without any harming deformation.
SGM Technology for Lighting Installation method via clamp Please refer to the picture below: Screw one clamp each via a M12 screw and nut onto the Omega holders. Insert the quick-lock fasteners of the first Omega holder into the respective holes on the bottom of the device.
SGM Technology for Lighting DMX-512 control connection The product has a DMX 512 input fitted with standard 5-pin XLR connectors. Screened cables in compliance with EIA RS-485 specifications and the following characteristics must be used for connections: - 2 conductors plus screen...
SGM Technology for Lighting Projector DMX starting address selection All fixtures should be given a DMX starting address when using a DMX signal, so that the correct fixture responds to the correct control signals. This digital starting address is the channel number from which the fixture starts to ‘’listen’’...
Page 12
SGM Technology for Lighting Default settings shaded. Main Sub. Extension Display Function menu menu VALU A001~AXXX (AXXX) DMX address setting SLAV ON/OFF (SLAV) Slave setting ADDR Change address EBOC ON/OFF external controller ALON (AU-A) Automatic Run in Stand Alone AUTO...
SGM Technology for Lighting Main functions - Main menu 0 1. Press [MODE/ESC] to enter the main menu "MODE" (display flashing) 2. Press [ENTER] and select "ADDR",’’RUN’’ or "DISP" by pressing [UP] or [DOWN] button. 3. Press [ENTER] for selecting the desired sub menu.
Page 14
SGM Technology for Lighting - Program Run, Master setting With the function "RUN", you can run the internal program. You can set the number of steps under Step. You can edit the individual scenes under Edit. You can run the individual scenes either automatically (AUTO), i.e.
Page 15
SGM Technology for Lighting - Main menu 1 1. Press [MODE/ESC] to enter the main menu (display flashing). 2. Press [UP] or [DOWN] button to select ‘’LAMP’’. - Lamp on/off With this function you can switch the lamp on or off via the Control Board.
Page 16
SGM Technology for Lighting - Pan Reverse With this function you can reverse the Pan-movement. 1. Select ‘’RPAN’’ by pressing [UP] or [DOWN] button. 2. Press [ENTER], the display shows ‘’ON’’ or ‘’OFF’’. 3. Press [UP] to select ‘’ON’’ if you wish to enable this function or press [DOWN] button to ‘’OFF’’ if you don’t.
Page 17
SGM Technology for Lighting - Movement mode select With this function you can select the movement mode. Select “SPEE” by pressing [UP] or [DOWN] button. Press [ENTER], the display shows “SP-1” or “SP-2”. Select “SP-1” or “SP-2” by pressing [UP] or [DOWN] button.
Page 18
SGM Technology for Lighting - Fixture code and motor fix 1. Select “WHEL” by pressing [UP] or [DOWN] button. 2. Press [ENTER], the display shows “CODE” or “CH01-CH30”. 3. Select “CODE” or “CH01-CH30” by pressing [UP] or [DOWN] button. 4. Press [ENTER] to confirm or Press [MODE/ESC] to return to the main menu.
Page 19
SGM Technology for Lighting - Main menu 5 Press [MODE/ESC] to enter the main menu (display flashing). Press [UP] or [DOWN] button to select ‘’EDIT’’. - Define the number of steps in Run With this function you can define the number of steps in the Program Run.
Page 20
SGM Technology for Lighting - Editing the channels of the individual scenes With this function you can edit the program to be called up in Run. a) Editing via the Control Board 1. Select ‘’SC01’’ by pressing [UP] or [DOWN] button.
SGM Technology for Lighting INSTRUCTIONS ON USE: DMX channel´s functions and their values (14 DMX channels): Channel 1 - PAN movement 8bit Channel 2 – Pan fine 16bit Channel 3 - TILT movement 8bit Channel 4 – Tilt fine 16bit...
Page 22
SGM Technology for Lighting Channel 8 - Shutter, strobe: 0-31 Shutter closed 32-63 Dimmer control (shutter open) 64-95 Strobe effect slow to fast 96-127 No function (shutter open) 128-159 Pulse-effect in sequences 160-191 No function (shutter open) 192-223 Random strobe effect slow to fast...
Page 23
SGM Technology for Lighting 70-83 Gobo 5 84-97 Gobo 6 98-111 Gobo 7 112-127 Gobo 1 shake slow to fast 128-143 Gobo 2 shake slow to fast 144-159 Gobo 3 shake slow to fast 160-175 Gobo 4 shake slow to fast...
SGM Technology for Lighting ERROR CODES: When power is applied, the unit will automatically enter “reset/test” mode. This mode brings all the internal motors to a home position. If there is an internal problem with one or more of the motors an error code will flash in the display in the form of “XXer”...
SGM Technology for Lighting CLEANING AND MAINTENANCE The following points have to be considered during the inspection: 1. All screws for installing the devices or parts of the device have to be tightly connected and must not be corroded. 2. There must not be any deformations on the housing, color lenses, fixations and installation spots (ceiling, suspension, trussing).