SGM Giotto 1500 Instruction Manual page 42

SGM
OPERATING SETUP
BOOST
NORMAL
LAMP POWER
SAVING
STUDIO
ENABLE
LAMP CONTROL
DISABLE
ENABLE
RESET CONTROL
DISABLE
SHUTTER
CLOSE=DS
SHUTTER CLOSE
SHUTTER
COLOSE=EN
FACTORY=SET
FACTORY
FACTORY=OFF
PREVIOUS=SET
PREVIOUS
PREVIOUS=OFF
DISPLAY SETUP
100-53-40-27
BRIGHTNESS
20-13-6-0(%)
DISPLAY FLIP -
STATISTIC
LAMP HOUR -
LAMP STRIKE -
SCANNER HOUR -
SETTING
SETTING -
TEST
TEST=RESET
TEST=ALL
TEST=PAN
TEST=TILT
TEST=IRIS
TEST=COLOR
TEST=SHUTT
TEST=DIMM
TEST TEST=FROST
TEST=PRISM
TEST=BLADE
TEST=SHARP
TEST=ZOOM
TEST=CYANO
TEST=MAGEN
TEST=YELLW
TEST=CTO
RESERVED
-
RESERVED
User's manual 1.02
Sets the lamp power at 100%
Sets the lamp power at 95%
Sets the lamp power at 90%
Imposta la potenza della lampada a 800 Watt realizzando così il
funzionamento più silenzioso della macchina
Remote lamp ignition enabled.
Remote lamp ignition disabled.
Remote reset enabled.
Remote reset disabled.
Disables shutter closure in the event of pan/tilt loss of position.
Enables shutter closure in the event of pan/tilt loss of position.
Enables to set default parameters.
Value during normal operation.
Enables to restore the values of the parameters set immediately
before FACT=SET procedure.
PREV value during normal operation.
Allows adjustment of display brightness.
Default configuration =40%
Inverts display reading position. Used according to the position
in which the fixture is installed.
Read only Menu. Stores lamp elapsed time. Can be reset.
Read only Menu. Stores the number of lamp strike. Can be
reset.
Read only Menu. Stores fixture operating time.
Reserved Menu, access by password. Enable the calibration of
movement mechanical components (gobo wheels; color).
RESET of the Fixture.
Run the test of all the effects in sequence.
Run PAN test.
Run TILT test.
Run IRIS test.
Run the color wheel test.
Shutter test.
Dimmer test.
Frost test.
Prisms test.
Shaper Test
Sharpness Test
Zoom test.
Cyan wheel test.
Magenta wheel test.
Yellow wheel test.
CTO test.
-
- 42 -
GB
Giotto 1500