SGM Giotto 1500 Instruction Manual
  1. Manuals
  2. Brands
  3. SGM Manuals
  4. Spotlight
  5. Giotto 1500
  6. Instruction manual

SGM Giotto 1500 Instruction Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

GB

Table of Contents

................................................................................................................. 2
........................................................................................................... 3
1. I
............................................................................................................................ 6
................................................................................................................................. 6
................................................................................................................................................ 7
.................................................................................................................................. 17
............................................................................................................................ 20
..................................................................................................................................... 20
............................................................................................................................... 22
DMX ............................................................................................................................... 24
....................................................................................................................... 26
-
........................................................................................................................ 26
............................................................................................................................................................... 28
/
..................................................................................................................................................... 32
Installing / replacing Gobos ..................................................................................................................................... 33
/
/
............................................................................................................................................... 34
/
.............................................................................................................................................. 35
.............................................................................................................................................. 35
3.1 M
"C
ICROCOMPUTER
ONTROL
'
............................................................................................................................................... 38
.............................................................................................................................................. 41
.......................................................................................................................... 50
DMX SETUP ............................................................................................................................................................. 50
ARTNET SETUP....................................................................................................................................................... 53
PAN-TILT SETUP................................................................................................................................................... 54
OPERATING SETUP ................................................................................................................................................ 57
DISPLAY SETUP..................................................................................................................................................... 59
Giotto 1500
.................................................................................................... 2
............................................................................................ 4
............................................................................................................................................... 9
......................................................................................................................................... 11
........................................................................................................................................... 15
............................................................................................................... 18
...................................................................................................................... 19
.............................................................................................................. 20
.................................................................................................................. 21
.................................................................................................... 23
............................................................................................................................................. 23
............................................................................................. 24
) .................................................................................................. 25
.......................................................................................................... 26
....................................................................................................... 27
....................................................................................................................... 31
............................................................................................................................ 33
............................................................................................................................ 34
.......................................................................................................... 34
......................................................................................................... 35
........................................................................................................................................... 36
........................................................................................................ 37
".............................................................................................................. 37
.............................................................................................. 37
.................................................................................................... 37
................................................................................................................... 38
......................................................................................................................................... 44
........................................................................................................................................... 47
................................................................................. 21
- 1 -
SGM

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Giotto 1500 and is the answer not in the manual?

Questions and answers

Related Manuals for SGM Giotto 1500

Summary of Contents for SGM Giotto 1500

  • Page 1: Table Of Contents

    .............................. 41 CONFIGURATION PROFILE ............................44 CONFIGURATION DIGITAL ............................47 CONFIGURATION 3.5 M .......................... 50 ESCRIPTION DMX SETUP ................................50 ARTNET SETUP............................... 53 PAN-TILT SETUP..............................54 OPERATING SETUP ..............................57 DISPLAY SETUP..............................59 - 1 - Giotto 1500 User’s Manual 1.02...
  • Page 2 5. C ........................67 ONTROL CHANNELS SPOT ............................... 67 CONFIGURATION WASH .............................. 78 CONFIGURATION PROFILE ............................83 CONFIGURATION DIGITAL ............................92 CONFIGURATION ............99 ONVERSION TABLE DA VALORI DMX A TEMPI MSPEED - 2 - User’s manual 1.02 Giotto 1500...

  • Page 3: Symbols Used

    If any doubts arise regarding the topics covered in this manual or should any further help be required, our online services ( www.sgm.it ) are available 24 hours a day. In the FAQ section of the technical assistance zone, answers can be found to numerous common queries: fixtures, firmware and manuals can also be downloaded whenever required.

  • Page 4: General Warnings

    THIS UNIT IS NOT FOR HOME USE, ONLY PROFESSIONAL APPLICATIONS AFTER HAVING REMOVED THE PACKAGING, CHECK THAT THE FIXTURE IS NOT DAMAGED IN ANY WAY.IF IN DOUBT, DON'T USE IT AND CONTACT AN AUTHORIZED SGM TECHNICAL SERVICE CENTRE. PACKAGING MATERIAL (PLASTIC BAGS, POLYSTYRENE FOAM, NAILS, ETC.) MUST NOT BE LEFT WITHIN CHILDREN'S REACH, AS IT CAN BE DANGEROUS.
  • Page 5 Your supplier can give details of local arrangements for the disposal of SGM products. Protect the environment: don't throw packing material into your garbage can return it to your SGM retailer or take it to the nearest special waste collection point.

  • Page 6: Ntroduction

    NTRODUCTION 1.1 Main features The new SGM Giotto 1500 comes with a 1200W lamp that has the luminous power of 1400W. And increased luminous intensity is just one of the new features in a series manufactured using technology which opens up enormous possibilities for greater use of moving head fixtures.

  • Page 7: Spot Configuration

    Compatible MRS GOLD 1500 FastFit (6.400°K) Average lamp life 750 hr. Fast restrike Remote lamp on/off via DMX. Lamp power reduction in the event of overheating Lamp elapsed time and strike counter - 7 - Giotto 1500 User’s Manual 1.02...
  • Page 8 Power supply with PFC (universal 90÷245V 50/60Hz); protected against 400V Electronic Ballast. ONSUMPTION Max consumption: 2,000 W Automatic energy saving in the event of blackout use IMENSIONS x 48 x 55 cm D): 79 EIGHT 47 Kg - Spot configuration - 8 - User’s manual 1.02 Giotto 1500...

  • Page 9: Wash Configuration

    DMX 512 or RS 232 input signal 20 DMX channels - Wash configuration Ethernet interface (ART-NET protocol) Wireless DMX interface fitted as standard RDM protocol implemented on DMX (monitoring of internal parameters) - 9 - Giotto 1500 User’s Manual 1.02...
  • Page 10 Power supply with PFC (universal 90÷245V 50/60Hz); protected against 400V Electronic Ballast. ONSUMPTION Max consumption: 2000 W Automatic energy saving in the event of blackout use IMENSIONS (HxLxD): 79 x 48 x 55 cm EIGHT 45 kg - Wash configuration - 10 - User’s manual 1.02 Giotto 1500...

  • Page 11: Profile Configuration

    Lamp power reduction in the event of overheating Lamp elapsed time and strike counter 530° Pan (4 sec.). 250° Tilt (3.4 sec.). Pan / Tilt Lock; electronic Pan / Tilt unlocking. Pan/Tilt w. 8/16 bit resolution Automatic Pan/Tilt repositioning - 11 - Giotto 1500 User’s Manual 1.02...
  • Page 12 Power supply with PFC (universal 90÷245V 50/60Hz); protected against 400V Electronic Ballast. ONSUMPTION Max consumption: 2,000 W Automatic energy saving in the event of blackout use IMENSIONS (HxLxD): 79 x 48 x 55 cm EIGHT 47 Kg - Profile configuration - 12 - User’s manual 1.02 Giotto 1500...
  • Page 13 DMX 512 or RS 232 input signal 20 DMX channels - Beam configuration Ethernet interface (ART-NET protocol) Wireless DMX interface fitted as standard RDM protocol implemented on DMX (monitoring of internal parameters) - 13 - Giotto 1500 User’s Manual 1.02...
  • Page 14 ONSUMPTION Max consumption: 2,000 W Automatic energy saving in the event of blackout use (H X L X D) IMENSIONS 79 x 48 x 55 cm EIGHT 43 Kg - Beam configuration - 14 - User’s manual 1.02 Giotto 1500...

  • Page 15: Digital Configuration

    Compatible MRS GOLD 1500 FastFit (6.400°K) Average lamp life 750 hr. Fast restrike Remote lamp on/off via DMX. Lamp power reduction in the event of overheating Lamp elapsed time and strike counter - 15 - Giotto 1500 User’s Manual 1.02...
  • Page 16 Power supply with PFC (universal 90÷245V 50/60Hz); protected against 400V Electronic Ballast. ONSUMPTION Max consumption: 2,000 W Automatic energy saving in the event of blackout use IMENSIONS (HxLxD): 79 x 48 x 55 cm EIGHT 45 Kg - Digital configuration - 16 - User’s manual 1.02 Giotto 1500...

  • Page 17: Accessories

    ..Reflector concentrata cod: ..Lampada MSR GOLD 1500 FAST FIT (6400°K) cod: ..Flight case singolo cod: 0061856 - 17 - Giotto 1500 User’s Manual 1.02...

  • Page 18: Electrical Specifications

    (detachment of the neutral wire or floating low tensions). This is why SGM focused on developing a system able to protect Giotto 1500 from the most common problems about electric plans, making everything clear to the last user.

  • Page 19: Mechanical Features

    RESERVES THE RIGHTS TO IMPROVE OR MODIFY ITS PRODUCT AT ANY TIME WITHOUT PRIOR NOTICE ALWAYS REFER TO THE MANUAL SUPPLIED WITH THE UNIT TO AVOID ANY RISK OF MISTAKE OR OPERATION WHICH DOES NOT CORRESPOND TO THE MANUAL INDICATIONS - 19 - Giotto 1500 User’s Manual 1.02...

  • Page 20: Installation

    Wiring and connection work must be carried out by experienced qualified staff. Class one equipment must be earthed (grounded) Do not power Giotto 1500 units with dimmers, as this could damage their on-board power supply Before connecting the unit, make certain that the mains power supply is the same as indicated on the fixture’s ID plate...

  • Page 21: Installing The Fixture On A Support Structure

    KEEP ANY INFLAMMABLE MATERIAL AT A DISTANCE OF AT LEAST 1,5M FROM THE FIXTURE. POSITION THE FIXTURE AT LEAST 1,5MT FORM THE SURFACE TO BE LIT. 2.4 Positioning the fixture Can be installed in any position. - 21 - Giotto 1500 User’s Manual 1.02...

  • Page 22: Fitting Clamps

    Fix the fixture to the support structure using two safety chains fixed to the clamp (PICT. 2) Don't fix the safety chain to the handles, use the safety chain fixing point located in the center of the base. Pict. 1 Pict. 2 Pict. 3 Pict. 4 - 22 - User’s manual 1.02 Giotto 1500...

  • Page 23: Construction Of The Signal Cable

    2.6 Construction of the signal cable Giotto 1500 Shas a DMX 512 input fitted which uses standard XLR 5 Pins connector. For the connection use screened cables having the EIA RS-485 specifications with the following features: 2 conductors plus screen 120 ohm impendance- low capacity Max transmission speed 250 Kbaud.

  • Page 24: Construction Of The Dmx Termination

    XLR connector (see diagram).. 2.8 Wireless DMX Giotto 1500 has a standard DMX wireless connection. It uses a technology originating from GSM, with a range of action, which is over 500 metres. It has widely been tested in places with WiFi signal, Bluetooth, GPRS-UMTS, giving excellent results.

  • Page 25: Rdm (Remote Device Management)

    Disc Unique Branch It allows to read device’s RDM code Disc Mute It prevents the device from responding during discovery procedure Disc Un Mute It allows the device to respond during discovery procedure. - 25 - Giotto 1500 User’s Manual 1.02...

  • Page 26: Connection

    1. Install the USB-DMX driver on the PC you will use to download the software. The driver and the instructions to install it will be available in our web site www.sgm.it 2. Connect the USB-DMX cable from the PC to the fixture.

  • Page 27: Access To Internal Components

    To access internal components, proceed as follows: 1. Place the head of the Giotto 1500 in a vertical position (Pict.1) 2. Use a screwdriver to loosen screws 1, 2, 3 and 4 (Pict.1) 3. Extract the cover "A" (Pict.2) outwards.

  • Page 28: Module Change

    ODULE CHANGE Pict. 1 – Configurations: Spot, Profile, Digital Pict. 2 – Wash Configuration - 28 - User’s manual 1.02 Giotto 1500...
  • Page 29 6 screws for Wash configuration. Pict 2 4. Draw out the module as needed. Example Pict. 3, Pict. 4, Pict. 5 Refer to the table below to configure Giotto 1500 in the 4 modules: Spot – Wash – Profile – Digital.
  • Page 30 Giotto 1500 Configurations GIOTTO SPOT 1500 GIOTTO WASH 1500 GIOTTO PROFILE 1500 GIOTTO DIGITAL 1500 with CMY colour mixing with CMY colour mixing with CMY colour mixing with CMY colour mixing system, linear CTO filter system, linear CTO filter system, linear CTO filter...

  • Page 31: Installing / Replacing The Lamp

    3. Wheel the lamp anticlockwise and take it off to replace it. 4. Don’t touch the lamp bulb barehanded. Always use a cloth or gauntlets to handle the lamp during installation or removal operation. - 31 - Giotto 1500 User’s Manual 1.02...

  • Page 32: Lamp Alignment

    FUOCO correctly and do not project GOBOS or COLORS. 5. Use screws 1, 2 and-3 to align the lamp until an evenly projected light beam is obtained, with no shadows or zones which are brighter than others - 32 - User’s manual 1.02 Giotto 1500...

  • Page 33: Installing / Replacing Gobos

    DICRO: Once opened the fixture choose which of the gobos is to be replaced, gently press in order to remove the spring, the ring and the gobo, paying attention that they don’t fall into fixture. Insert the new gobo, the ring and the fixing spring pict. 2. - 33 - Giotto 1500 User’s Manual 1.02...

  • Page 34: Installing / Replacing Reflector

    Grip the Animation wheel with both the hands, gently press towards the bottom and at the same time extract the wheel (see arrow "B" Pict.2) INSTALLATION: Repete the operations in the contrary order, carefully aligning the hole “1”(Pict.1) to the plug. - 34 - User’s manual 1.02 Giotto 1500...

  • Page 35: Installing / Replacing The Color Filters

    Installation of the new color filter: 1. Carefully widen the disks again as indicated in picture 1A. 2. Slide in the new color filter until it fits into its engraved slot as indicated in pict. B4. - 35 - Giotto 1500 User’s Manual 1.02...

  • Page 36: Replacing Lens Front

    EPLACING LENS FRONT Pict. 1 Pict. 2 Lens group replacement: 1) Loosen the four screws, which fix the lens-holder cap Pict. 1 2) Disconnect safety cable 3) Replace lens group - 36 - User’s manual 1.02 Giotto 1500...

  • Page 37: Micro Computer Control

    OMPUTER ONTROL 3.1 Microcomputer “Control” Giotto 1500 is fitted with a microcomputer that enables the best fixture customization to the type of installation. It is possible: To assign the starting address Receive data on lamp elapsed time and fixture operating time...

  • Page 38: Structure Of The Menu

    3.4 Structure of the menu Here below are indicated the options composing Giotto 1500 menu. SPOT CONFIGURATION Menu Options Description DMX SETUP Fixture addressing ADDRESS XXX Range 001-456 Enables the DMX WIRELESS WIRELESS Disable the DMX WIRELESS. Disable the previous WIRELESS setting.
  • Page 39 Goboshake gobo1 wheel test. SHAKE TEST=GOBO2 Goboshake gobo2 wheel test. SHAKE TEST=DIFFRACT Diffract wheel test. TEST=CYANO Cyan wheel test. TEST=MAGEN Magenta wheel test. TEST=YELLW Yellow wheel test. CTO test. TEST=CTO RESERVED RESERVED - 39 - Giotto 1500 User’s Manual 1.02...
  • Page 40 SERVICE SERVICE Service menu. ADDRESS 100 Message shown by the display in fixture normal working ADDRESS 100 condition (i.e. 100 is the DMX 512 channel on which the first unit is set). - 40 - User’s manual 1.02 Giotto 1500...

  • Page 41: Wash Configuration

    Vector operating mode. Mspeed channel is enabled. Allows to slow maximum Pan and Tilt speed. 100% - 92% SPEED 84% - 76% Default configuration = 100% Fast Optimises speed performance. ACCELLERATION Slow Optimises smooth movement. - 41 - Giotto 1500 User’s Manual 1.02...
  • Page 42 TEST=FROST Frost test. TEST=PRISM Prisms test. TEST=BLADE Shaper Test TEST=SHARP Sharpness Test TEST=ZOOM Zoom test. TEST=CYANO Cyan wheel test. TEST=MAGEN Magenta wheel test. TEST=YELLW Yellow wheel test. TEST=CTO CTO test. RESERVED RESERVED - 42 - User’s manual 1.02 Giotto 1500...
  • Page 43 Displays the sofware version of the head attribution board. SERVICE SERVICE Service menu. ADDRESS Message shown by the display in fixture normal working ADDRESS 100 condition (i.e. 100 is the DMX 512 channel on which the first unit is set). - 43 - Giotto 1500 User’s Manual 1.02...

  • Page 44: Profile Configuration

    Vector operating mode. Mspeed channel is enabled. Allows to slow maximum Pan and Tilt speed. 100% - 92% SPEED 84% - 76% Default configuration = 100% Fast Optimises speed performance. ACCELLERATION Slow Optimises smooth movement. - 44 - User’s manual 1.02 Giotto 1500...
  • Page 45 Zoom test. TEST=GOBO Goboshake gobo wheel test. SHAKE TEST=BLADE Shaper Test TEST=DIFFRACT Diffract wheel test. TEST=CYANO Cyan wheel test. TEST=MAGEN Magenta wheel test. TEST=YELLW Yellow wheel test. TEST=CTO CTO test. RESERVED RESERVED - 45 - Giotto 1500 User’s Manual 1.02...
  • Page 46 Displays the sofware version of the head attribution board. SERVICE SERVICE Service menu ADDRESS Message shown by the display in fixture normal working ADDRESS 100 condition (i.e. 100 is the DMX 512 channel on which the first unit is set). - 46 - User’s manual 1.02 Giotto 1500...

  • Page 47: Digital Configuration

    Vector operating mode. Mspeed channel is enabled. Allows to slow maximum Pan and Tilt speed. 100% - 92% SPEED 84% - 76% Default configuration = 100% Fast Optimises speed performance. ACCELLERATION Slow Optimises smooth movement. - 47 - Giotto 1500 User’s Manual 1.02...
  • Page 48 Goboshake gobo1 wheel test. SHAKE TEST=GOBO2 Goboshake gobo2 wheel test. SHAKE DOFFRACT Diffract wheel test. TEST=CYANO Cyan wheel test. TEST=MAGEN Magenta wheel test. TEST=YELLW Yellow wheel test. TEST=CTO CTO test. RESERVED RESERVED - 48 - User’s manual 1.02 Giotto 1500...
  • Page 49 Message shown by the display in fixture normal working ADDRESS 100 condition (i.e. 100 is the DMX 512 channel on which the first unit is set). PC SETUP PC SETUP PC RECOVERY PC RECOVERY - 49 - Giotto 1500 User’s Manual 1.02...

  • Page 50: Menu Description

    3.5 Menu Description DMX SETUP 1. Connect Giotto 1500 to the power supply, wait till it has completed reset operations. 2. Use the DIAL to find the “DMX SETUP” menu. Press ENTER to confirm. 3. Use the DIAL to select the menu desired among: ADDRESS –...
  • Page 51 ADDRESS ADDRESS PROFILE CONFIGURATION HRV (35Ch) HRT (34Ch) LRV (33Ch) LRT (32Ch) ° ° ° ° FIXTURE N TARTING FIXTURE N TARTING FIXTURE N TARTING FIXTURE N TARTING ADDRESS ADDRESS ADDRESS ADDRESS - 51 - Giotto 1500 User’s Manual 1.02...
  • Page 52 ADDRESS ADDRESS Wireless Giotto 1500 to be fitted with the DMX Wireless connection as standard. It WIRELESS uses atechnology based on the idea of GSM, with a radius over 500 meters. It has been widely tested in environments with WiFi, bluetooth, GPRS-UMTS signals, with excellent results.

  • Page 53: Artnet Setup

    2. The dispaly will show the signal used. ARTNET SETUP 1. Connect Giotto 1500 to the power supply, wait till it has completed reset operations. 2. Use the DIAL to find the “ARTNET SETUP” menu. Press ENTER to confirm. 3. Use the DIAL to select the menu desired among: IP ADDRESS1 - IP ADDRESS2 - IP ADDRESS3 - IP ADDRESS4 - SUBNET MASK1 - SUBNET MASK2 - SUBNET MASK3 - SUBNET MASK4 –...

  • Page 54: Pan-Tilt Setup

    4. Premere il tasto ESC per confermare le modifiche. PAN-TILT SETUP 1. Connect Giotto 1500 to the power supply, wait till it has completed reset operations. 2. Use the DIAL to find the “PAN-TILT SETUP” menu. Press ENTER to confirm.
  • Page 55 Setting Pan movement starting angle Giotto 1500 has a Pan movement range of 530°. If the entire excursion PAN POS MIN=000 doesn't have to be used, two parameters allow to set the starting angle (MIN) and ending angle(MAX), which 4°. To limit pan movement, proceed...

  • Page 56: Speed Control

    Pan/Tilt inversion This function also allows to optimize Giotto 1500 moving head in relation PAN TILT SWAP=OFF to the operator’s position, in order to simplify all positioning procedure. When PAN TILT SWAP is enabled (ON), this means that the lighting console sends the data regarding Pan to the Tilts controls and vice versa.

  • Page 57: Operating Setup

    3. Use the DIAL to select the option desired. 4. Press ESC to confirm. OPERATING SETUP 4. Connect Giotto 1500 to the power supply, wait till it has completed reset operations. PAN-TILT SETUP 5. Use the DIAL to find the “...
  • Page 58 Remote control lamp ignition Operators can decide if the ignition of Giotto 1500 Giotto 1500 is to be LAMP CONTROL=DS controlled from a lighting console or be automatic. To access this function, proceed as follows: 1. Use the DIAL to find “LAMP CONTROL” menu.

  • Page 59: Display Setup

    DEFAULT. In the meantime the voice PREV stops flashing and the message PREVIOUS=OFF appears. DISPLAY SETUP Connect Giotto 1500 to the power supply, wait till it has completed reset operations. PAN-TILT SETUP Use the DIAL to find the “ ” menu. Press ENTER to confirm.

  • Page 60: Statistic

    STATISTIC 1. Connect Giotto 1500 to the power supply, wait till it has completed reset operations. PAN-TILT SETUP Use the DIAL to find the “ ” menu. Press ENTER to confirm. 2. Use the DIAL to select the menu desired among: LAMP HOUR - LAMP STRIKE - SCANNER HOUR.

  • Page 61: Setting

    ”white” starting position. To do the calibartion please proceed as follows: SETTING 1. Connect Giotto 1500 to the power supply, wait that the reset operation are completed. 2. Use the DIAL to find “SETTING” menu.

  • Page 62: Reserved

    To check the internal temperature, proceed as follows: 1. Connect Giotto 1500 to the power supply, wait that the reset operation are completed. 2. Use the DIAL to find “TEMPERATURE” menu.

  • Page 63: Error Messages

    The processor-in does not receive data from pan processor card TILT COM FAIL The processor-in does not receive data from tilt processor card COLOR COM FAIL The processor-in does not receive data from colour processor card - 63 - Giotto 1500 User’s Manual 1.02...

  • Page 64: Maintenance

    WASH configuration, this grants more speed in case of technical operations or maintenance service. Giotto 1500 head was designed according to a totally new concept: this has enabled all the fixture’s optical functions to be divided in different modules.

  • Page 65: User's Manual 1.02

    Le ventole non devono essere ostacolate dalla polvere. Usare un aspirapolvere per rimuovere lo sporco delle ventole che si trovano nella testa e nella base. Per una pulizia ottimale è possibile smontare il filtro metallico presente sulle due ventole anteriori della testa, come da figura. - 65 - Giotto 1500 User’s Manual 1.02...

  • Page 66: B B Uffer

    The lamp replacement has to be considered an ordinary maintenance operation (ref. – Lamp Installation/Replacement – pg. 27). Giotto 1500 lamp lifespan is about 750 hours, then it is necessary to replace it. In the total life hours calculation consider that each lamp strike reduces of about 15 minutes the average lamp life.

  • Page 67: Control Channels

    SPOT CONFIGURATION Giotto 1500 is compatible with all the consoles using the standard USITT DMX512 signal and can operate in 4 different modes : HRV (35 Ch), HRT (34 Ch), LRV (32 Ch), LRT (31 Ch). HR (HIGH RESOLUTION) modes use three additional DMX channels rather than the LR (LOW RESOLUTION) operating mode;...
  • Page 68 C = 36 COLOR 1 C = 72 COLOR 2 Linear Color indexing. C = 108 COLOR 3 C = 144 COLOR 4 C = 180 COLOR 5 C = 216 COLOR 6 - 68 - User’s manual 1.02 Giotto 1500...
  • Page 69 SPEED3 211 – 217 RAINBOW SPEED4 218 – 224 RAINBOW SPEED5 225 – 231 RAINBOW SPEED6 232 – 238 RAINBOW SPEED7 239 – 245 RAINBOW SPEED8 246 – 255 GOBOS MUSIC CHANGE - 69 - Giotto 1500 User’s Manual 1.02...
  • Page 70 Up rotation MIN - Up rotation MAX PRISM (Ch11) DMX512 LEVEL RANGE 0—255 FUNCTION 0 – 85 No prism – No Expander 86 - 170 Beam expander inserted 171 - 255 Prism inserted - 70 - User’s manual 1.02 Giotto 1500...
  • Page 71 Slowest - Fastest LAMP STRIKING AND RESET (Ch18) DMX512 LEVEL RANGE 0-- 255 FUNCTION 10 – 60 LAMP 61 – 129 Hysteresis 130 -- 179 180 – 239 Hysteresis RESET 240 – 255 Reset - 71 - Giotto 1500 User’s Manual 1.02...
  • Page 72 MUSIC HARD CHANGE Sound to light color change to low frequency GOBO1 ROTATION MODE CHANNEL (Ch21) DMX512 LEVEL RANGE 0—255 FUNCTION 0 - 127 Gobos Wheel 1 position indexing 128 - 255 Gobos1 wheel rotation at adjustable speed in both directions - 72 - User’s manual 1.02 Giotto 1500...
  • Page 73 Reserved for future use 224 – 231 Reserved for future use 232 – 239 Reserved for future use 240 – 247 Reserved for future use 248 – 255 Reserved for future use - 73 - Giotto 1500 User’s Manual 1.02...
  • Page 74 GOBO1 ROTATION CHANNEL (Ch23) WITH GOBO1 ROTATION MODE (Ch21) = GOBO1 INDEXABLE POSITION DMX512 LEVEL RANGE 0—255 FUNCTION 0 - 255 Gobo1 position adjustment in linear mode on all 360° (LSB). Finish adjustment. - 74 - User’s manual 1.02 Giotto 1500...
  • Page 75 Gobo2 position adjustment in linear mode on all 360° (LSB) GOBO2 ROTATION MODE CHANNEL (Ch27) DMX512 LEVEL RANGE 0—255 FUNCTION 0 - 127 Gobos 2 wheel position indexing 128 - 255 Gobos2 at adjustable speed in both directions - 75 - Giotto 1500 User’s Manual 1.02...
  • Page 76 DMX VALUE FUNCTION OPEN 0 - 255 CMY SYSTEM MAGENTA WHEEL LINEAR INSERTION FULL COLOR YELLOW (CH33) DMX VALUE FUNCTION OPEN 0 - 255 CMY SYSTEM YELLOW WHEEL LINEAR INSERTION FULL COLOR - 76 - User’s manual 1.02 Giotto 1500...
  • Page 77 FUNCTION OPEN 0 - 255 CTO COLOUR FILTER WHEEL LINEAR INSERTION FULL COLOR FUOCO ELETTRONICO (Ch35) DMX512 LEVEL RANGE 0—255 FUNCTION 0 – 255 Linear adjustment 0 – 100%. Finish adjustment (LSB) - 77 - Giotto 1500 User’s Manual 1.02...

  • Page 78: Wash Configuration

    WASH CONFIGURATION Giotto 1500 is compatible with all the consoles using the standard USITT DMX512 signal and can operate in 2 different modes: V (20 Ch), T (19 Ch). The operating modes and therefore the total number of channels used by Giotto 1500 depend on the settings configured on the SPEED CONTROL menu.
  • Page 79 Strobe at the frequence of 10 Hz Low Shutter strobe, strobe effect at max power synchronised 120 -- 152 on the bass. 153 -- 185 Music flash low 186 – 255 Open - 79 - Giotto 1500 User’s Manual 1.02...
  • Page 80 Reserved for future use 224 – 231 Reserved for future use 232 – 239 Reserved for future use 240 – 247 Reserved for future use 248 – 255 Reserved for future use - 80 - User’s manual 1.02 Giotto 1500...
  • Page 81 DMX VALUE DESCRIPTION OPEN 0 - 255 CMY SYSTEM CYANO WHEEL LINEAR INSERTION FULL COLOR MAGENTA (CH16) DMX VALUE DESCRIPTION OPEN 0 - 255 CMY SYSTEM MAGENTA WHEEL LINEAR INSERTION FULL COLOR - 81 - Giotto 1500 User’s Manual 1.02...
  • Page 82 DMX VALUE DESCRIPTION OPEN 0 - 255 CMY SYSTEM YELLOW WHEEL LINEAR INSERTION FULL COLOR CTO (CH20) DMX VALUE DESCRIPTION OPEN 0 - 255 CTO COLOUR FILTER WHEEL LINEAR INSERTION FULL COLOR - 82 - User’s manual 1.02 Giotto 1500...

  • Page 83: Profile Configuration

    PROFILE CONFIGURATION Giotto 1500 is compatible with all the consoles, which use USITT and DMX512 standard signal and can work in four different modalities: HRV (35 Ch), HRT (34 Ch), LRV (33 Ch9, LRT (32 Ch). HR (HIGH RESOLUTION) modalities use two more DMX channels in comparison to LS (low resolution) work modalities;...
  • Page 84 C = 0 WHITE Color linear C = 36 regulation in any C = 72 GREEN field C = 108 BLUE C = 144 PINK C = 180 AMBER C = 216 WOOD - 84 - User’s manual 1.02 Giotto 1500...
  • Page 85 SPEED3 211 – 217 RAINBOW SPEED4 218 – 224 RAINBOW SPEED5 225 – 231 RAINBOW SPEED6 232 – 238 RAINBOW SPEED7 239 – 245 RAINBOW SPEED8 246 – 255 GOBOS MUSIC CHANGE - 85 - Giotto 1500 User’s Manual 1.02...
  • Page 86 ROTATION AT DIFFERENT SPEED IN BOTH DIRECTIONS DMX512 LEVEL RANGE 0—255 FUNCTION 0 - 111 Down rotation MAX - Down rotation MIN 112 – 144 Stopped 145 - 255 Up rotation MIN - Up rotation MAX - 86 - User’s manual 1.02 Giotto 1500...
  • Page 87 Slowest - Fastest LAMP STRIKING AND RESET (Ch18) DMX512 LEVEL RANGE 0-- 255 FUNCTION 10 – 60 LAMP 61 – 129 Hysteresis 130 -- 179 180 – 239 Hysteresis RESET 240 – 255 Reset - 87 - Giotto 1500 User’s Manual 1.02...
  • Page 88 COLOR SOFT Analogic color selection on every position 153 – 203 RAINBOW SOFT Continuous color rotation with adjustable speed 204 – 255 MUSIC HARD CHANGE Sound to light color change to low frequency - 88 - User’s manual 1.02 Giotto 1500...
  • Page 89 Reserved for future use 224 – 231 Reserved for future use 232 – 239 Reserved for future use 240 – 247 Reserved for future use 248 – 255 Reserved for future use - 89 - Giotto 1500 User’s Manual 1.02...
  • Page 90 Gobo1 position adjustment in linear mode on all 360° (LSB). Finish adjustment. FRAMMING SHUTTER OPENING (CH24,CH26,CH28,CH30) VALUE FUNZIONE OPEN 0 – 255 LINEAR REGULATION CLOSED FRAMMING SHUTTER ROTATION (CH25,CH27,CH29,CH31) VALUE FUNZIONE NO ROTATION 0 – 255 LINEAR REGULATION MAX ROTATION ANGLE - 90 - User’s manual 1.02 Giotto 1500...
  • Page 91 DMX VALUE DESCRIPTION OPEN 0 - 255 CMY SYSTEM YELLOW WHEEL LINEAR INSERTION FULL COLOR CTO (CH35) DMX VALUE DESCRIPTION OPEN 0 - 255 CTO COLOUR FILTER WHEEL LINEAR INSERTION FULL COLOR - 91 - Giotto 1500 User’s Manual 1.02...

  • Page 92: Digital Configuration

    DIGITAL CONFIGURATION Giotto 1500 is compatible with all consoles which use the standard USITT DMX512 signal and can operate in four different modes: HRV (64 Ch), HRT (63 Ch), LRV (51 Ch), LRT (50 Ch). The HR mode (HIGH RESOLUTION) uses 1 DMX channel more in respect to the LR operating modes (LOW RESOLUTION);...
  • Page 93 0 – 35 WHITE 36 – 71 COLOR 1 72 – 107 COLOR 2 108 – 145 COLOR 3 146 – 181 COLOR 4 182– 215 COLOR 5 216 – 255 COLOR 6 - 93 - Giotto 1500 User’s Manual 1.02...
  • Page 94 240 – 255 SPEED 16 COLOR 1 with color mode 1 = MUSIC HARD CHANGE DMX VALUE FUNCTION 0 – 127 MUSIC HARD CHANGE FULL COLOR 128 - 255 MUSIC HARD CHANGE HALF COLOR - 94 - User’s manual 1.02 Giotto 1500...
  • Page 95 SPEED 10 160 – 175 SPEED 11 176 – 191 SPEED 12 192 – 207 SPEED 13 208 – 223 SPEED 14 224 – 239 SPEED 15 240 – 255 SPEED 16 - 95 - Giotto 1500 User’s Manual 1.02...
  • Page 96 Choice of similar color at every position 153 – 203 RAINBOW SOFT Continuous ROTATION of colors with regulated speed 204 – 255 MUSIC HARD CHANGE Digital change of colors synchronized with the musical bass - 96 - User’s manual 1.02 Giotto 1500...
  • Page 97 DMX512 Level range 0—255 FUNCTION 0 – 255 LINEAR REGULATION 0 – 100%(MSB) ELECTRONIC FOCUS (LSB) DMX512 LEVEL RANGE 0—255 FUNCTION 0 – 255 LINEAR REGULATION 0 – 100% End regulation (LSB) - 97 - Giotto 1500 User’s Manual 1.02...
  • Page 98 192 -- 197 SW RESET 198 -- 203 NO FLIP 204 -- 209 FLIP X 210 -- 215 FLIP Y 216 – 221 FLIP XY 222 -- 239 NONE 240 -- 255 RESET - 98 - User’s manual 1.02 Giotto 1500...

  • Page 99: Conversion Table Da Valori Dmx A Tempi Mspeed

    Reserved for future use 224 – 231 Reserved for future use 232 – 239 Reserved for future use 240 – 247 Reserved for future use 248 – 255 Reserved for future use - 99 - Giotto 1500 User’s Manual 1.02...
  • Page 100 DMX VALUE DESCRIPTION OPEN 0 - 255 LINEAR INSERT TURN YELLOW OF CMY SYSTEM YELLOW INSERTED DMX VALUE DESCRIPTION OPEN 0 - 255 LINEAR INSERT TURN COLOR FILTER CTO CTO ALL INSERTED - 100 - User’s manual 1.02 Giotto 1500...
  • Page 101 LINEAR VARIATION of ROTATION from 0 to 72 degrees 86 – 255 LINEAR VARIATION of ROTATION from 72 to -72 degrees ROTATION PALETS (LSB) VALUE FUNCTION 0 – 255 END REGULATION OF PALETS - 101 - Giotto 1500 User’s Manual 1.02...
  • Page 102 128 – 143 Transition 8 144 – 159 Transition 9 160 – 175 Transition 10 176 – 191 Transition 11 192 – 207 Transition 12 208 – 255 Reserved for future use - 102 - User’s manual 1.02 Giotto 1500...
  • Page 103 Mirror Y 96 – 127 Mirror XY 128 – 159 Inverted color 160 – 191 Inverted color, Mirror X 192 – 123 Inverted color, Mirror Y 224 – 255 Inverted color, Mirror XY - 103 - Giotto 1500 User’s Manual 1.02...
  • Page 104 CONVERSION TABLE FROM DMX VALUES TO MSPEED TIMES DMX VALUE DMX VALUE MSPEED TIMES MSPEED TIMES IN SECONDS IN SECONDS 0 -- 1 Controller cross fade Controller cross fade Controller cross fade - 104 - User’s manual 1.02 Giotto 1500...
  • Page 105 - 105 - Giotto 1500 User’s Manual 1.02...

Table of Contents