Statistic - SGM Giotto 1500 Instruction Manual

SGM
1. Connect Giotto 1500 to the power supply, wait till it has completed reset operations.
Use the DIAL to find the "
2. Use the DIAL to select the menu desired among:
LAMP HOUR - LAMP STRIKE - SCANNER HOUR.
3. Press ENTER to confirm.
Lamp elapsed time meter
LAMP HOUR
Resetting the lamp elapsed time meter
LAMP HOUR
Lamp strike meter
LAMP STRIKE
Resetting the lamp strike meter
LAMP STRIKE
User's manual 1.02

STATISTIC

PAN-TILT SETUP
Giotto 1500 microcomputer stores various data, including those related to the
number of hours the lamp is lit (elapsed time). This is necessary to know in advance
when it's almost time of relamping: lamp life is approximately 750 hours.
To see how many hours a lamp has been used, proceed as follows::
1. Use the DIAL to find the "LAMP HOUR" menu. The lamp life hours will be
displayed automatically.
Each time a new lamp is fitted it's possible to reset the meter indicating the elapsed
time in order to have the real elapsed time for the lamp about to be fitted.
To reset the lamp elapsed time, proceed as follows:
1. Use the DIAL to find "LAMP HOUR" menu.
2. Press ENTER to confirm. The message on the display will start to flash.
3. Use the DIAL to reset the meter. On the contrary, use the DIAL to restores
the previous value.
4. Press ESC to confirm.
Giotto 1500 microcomputer stores various data, including those related to the
number of lamp strikes. This information is important because the 'unuseful' lamp
strikes cause stress to the components, so they can contribute to reduce the lamp
life.
To know the lamp strikes number:
1. Use the DIAL to find "LAMP STIKE". The strikes number will be displayed
automatically.
Each time the fixture is relamped, it is possible to reset the lamp strike meter which
counts the strikes, in order to have number of actual strikes for the lamp about to be
installed.
To reset the lamp strike meter, proceed as follows:
1. Use the DIAL to find "LAMP STIKE" menu.
2. Press ENTER to confirm. The message on the display will start to flash.
3. Use the DIAL to reset the meter. On the contrary, use the DIAL to restores the
previous value.
4. Press ESC to confirm.
" menu. Press ENTER to confirm.
- 60 -
GB
Giotto 1500