Fitting Clamps - SGM Giotto 1500 Instruction Manual

SGM

2.5 Fitting clamps

Always use two clamps to hang the fixture.
Attention!!
If the fixture is suspended from a truss suspended above ground or floor level, fix
the fixture with a steel safety cable.
Fix the fixture to the support structure using two safety chains fixed to the clamp (PICT. 2)
Don't fix the safety chain to the handles, use the safety chain fixing point located in the center
of the base.
Pict. 1
User's manual 1.02
Pict. 2
Pict. 3
- 22 -
GB
Pict. 4
Giotto 1500