Installation; Equipment; Power Cable Construction - SGM Giotto 1500 Instruction Manual

SGM

2.1 Equipment

During unpacking, make certain that all the necessary parts have been received and that the
fixture has not been damaged during transport. Should there be any problems, contact the local
authorized SGM distributor immediately.
Only the customer, in fact, can claim eventual damages in the fixture caused by the transportation.
GIOTTO 1500
WARRANTY BOOKLET
USER MANUAL
1 XLR 5 P MALE CONNECTOR
1 XLR 5 P FEMALE CONNECTOR
1 POWER-CON CONNECTOR
2 FAST-LOCK CLAMPS
2 ADDITIONAL LENS (only for WASH configuration)
1 SAFETY CABLE
1 ANTENNA WIRELESS
1 PHILIPS LAMP MSR GOLD 1200 FAST FIT
DO NOT DESPERD THE PACKING ELEMENTS.
THE PACKING ELEMENTS (PLASTIC BAGS, FOAM, NAILS, ETC.), MUST NEVER BE LEFT NEAR
CHILDREN, AS DANGEROUS. USE THE ORIGINAL PACKAGE IN CASE OF FIXTURE RETURN TO THE
MANUFACTURER FOR REPAIR OR MAINTENANCE SERVICE, IT HAS BEEN SPECIFICALLY MADE TO
PROTECT THE FIXTURE DURING THE TRANSPORT.

2.2 Power cable construction

ATTENCTION!!
Before installing the fixture check that the power supply cable AC is
disconnected.
Wiring and connection work must be carried out by experienced qualified staff.
Class one equipment must be earthed (grounded)
Do not power Giotto 1500 units with dimmers, as this could damage their on-board power
supply
Before connecting the unit, make certain that the mains power supply is the same as indicated
on the fixture's ID plate
The unit must be protected by a thermal/magnetic circuit-breaker
The power supply cable has the following colours:
SYMBOL COLOUR
L
N White
Green
The installer has to use a socket suitable to Giotto 1500's electrical input.
User's manual 1.02
Black
- 20 -
2. I
NSTALLATION
Giotto 1500
GB