Installing / Replacing The Color Filters; Spot Configuration; Wash Configuration - SGM Giotto 1500 Instruction Manual

GB SGM
I /
NSTALLING REPLACING THE COLOR FILTERS
SPOT C
ONFIGURATION
Select from the colour or effect wheel the dichroic filter which you want to replace.
Remove colour filter:
1. Grab the filter and exert a slight pressure upwards.
2. Take off the filter cautiously.
New colour filter installation:
1. Repeat the operations in the opposite way being careful while replacing the filter.
WASH
CONFIGURATION
B
A
Pict.1
Choose, in the color or effect wheel, which dichroic filters is to be replaced.
Color filter removal:
1. Widen the disks fitted in the color wheel as indicated in picture 1A
2. Grip the dichroic filter between your fingers and slide the filter out as indicated in picture 1B.
Installation of the new color filter:
1. Carefully widen the disks again as indicated in picture 1A.
2. Slide in the new color filter until it fits into its engraved slot as indicated in pict. B4.
- 35 -
Giotto 1500 User's Manual 1.02