Fresh Water System; Drainage System - Jeanneau LEADER 625 Owner's Manual

FRESH WATER SYSTEM

.
- Never operate the water system equipment when the tank is empty (the electric material may be
damaged).
- Check the water filter for condition (refer to manufacturer's instructions).
MAINTENANCE
- Visually check the water pump flow.
- Check the clamps and flexible hose connections for tightness.
- Pay attention to the seals for condition.
- Regularly make sure the bilge is perfectly clean.
- Immediately switch off the electric system in case a pump is running while all the water supplies
are turned off.
- In case of a leak check the system.
The bilge pump system is not designed to provide buoyancy to the boat in case of damage.
The bilge pump system is designed to drive out the water being either sea spray or leaks but
absolutely not the water coming through a hole in the hull, this hole being the result of a damage.
PRECAUTION

DRAINAGE SYSTEM

RECOMMENDATION
WARNING
45/70
6