- Never operate the water system equipment when the valve is closed or the tank is empty
(the electrical equipment may be damaged).
- Check the water filter for condition (refer to manufacturer's instructions).
- Close the taps of empty tanks.
Refer to chapter 2, "Safety".
Refer to "Fresh water and gas" diagram.
When changing the cylinder, refit the cap in place on the regulator threaded section (to avoid
corrosion).
Shut off the gas safety valve and the regulator tap when the stove is not in use.
FRESH WATER SYSTEM
PRECAUTION
GAS SYSTEM
RECOMMENDATION
75/116
7